Table of Contents
Advertisement
Note: Do not touch the microprocessor contacts. Contaminants on the microprocessor
contacts, such as oil from your skin, can cause connection failures between the contacts
and the socket.
b.
Align the installation tool with the microprocessor socket and lower down the installation tool.
The installation tool rests flush on the socket only if properly aligned.
Installation tool
Microprocessor
Figure 74. Installation tool alignment
c.
Install the microprocessor using the following instructions for your installation tool.
• Twist the handle of the installation tool assembly counterclockwise to the unlocked position
until you can not twist the handle any further; then, lift the installation tool out of the socket.
Figure 75. Installation tool handle adjustment
The following illustrations show the installation tool in the locked and unlocked positions.
88
System x3500 M5 Installation and Service Guide
Alignment pins
Advertisement
Table of Contents
Troubleshooting
