Lenovo System x3500 M5 Type 5464 Installation And Service Manual page 297

• If using Installation Tool B, twist the handle of the installation tool assembly counterclockwise
until the microprocessor is inserted into the socket, and lift the installation tool out of the
socket. The following illustration shows the tool handle in the open position.
Figure 205. Installation Tool B
Figure 206. Installation tool handle adjustment
Attention:
• Do not press the microprocessor into the socket.
• Make sure that the microprocessor is oriented and aligned correctly in the socket before
you try to close the microprocessor retainer.
• Do not touch the thermal material on the bottom of the heat sink or on top of the
microprocessor. Touching the thermal material will contaminate it.
Step 7. Remove the microprocessor socket dust cover, tape, or label from the surface of the
microprocessor socket, if one is present. Store the socket cover in a safe place.
E5-x6xx
E5-x6xx v2
.
Chapter 6 Removing and replacing components
281