Program 03 Piou, Pious Acd/Mis Slot Assignments - Toshiba Strata DK40 Programming Manual

Program 03 PIOU, PIOUS ACD/MIS Slot Assignments

Program 03
PIOU, PIOUS ACD/MIS Slot Assignments
Initialised Default:
(QWHU 3URJ 0RGH
PIOU, PIOUS Slot Number (15~18)
Program 03 Overview
This program is for specifying PIOU, or PIOUS ACD/MIS Slot Assignments.
If MIS output is required for ACD, set Code 42 for the slot in which the PIOU or PIOUS is
installed (that connects to the MIS Personal Computer).
Important! After the complete entry of Program 03, turn the KSU power supply switch off
Strata DK40 Programming Manual Spring 1999
n/a
0 6SNU 3 6 +ROG 0 6SNU
and wait five seconds before turning it back on. This will set in memory all of
the configuration data entered in Program 03.
Automatic Call Distribution
+ROG 6SNU & & +ROG
Enter 42 to assign the PIOU, PIOUS TTY Port as MIS port.
0 Power OFF (5 sec.) then ON
6-3