Programming Tips For Setting Up Voice Mail Integration; Led 20: Toshiba Stratagy/Vm (B + Station Number); Led 19: Toshiba Stratagy/Vm (B No Station); Led 18: Executive And Privacy Override Blocking (Modem) - Toshiba Strata DK40 Programming Manual

Program 31 Station Class of Service

Programming Tips for Setting Up Voice Mail Integration

If LED 15 or 19 is ON, turn LED 17 ON. If LED 20 is ON, turn LEDs 17 and 19 ON.
For SMDI or DTMF integration, turn ON LEDs 04, 16, 17 and 18, and one of the
following: 05, 06, 07, or 08 for all standard telephone ports connected to a VM unit.
Turn LED 19 and 20 OFF if the VM unit does not respond properly to transfer recall
(B-Tone) signals when using any type of Voice Mail Interface.
LED 09 – see above comments in Program Overview.
Important! Do not assign Program 31 VM/AA options to built-in Auto Attendant digital

LED 20: Toshiba Stratagy/VM (B + Station Number)

Use with Toshiba Stratagy/Stratagy DK systems connected to a standard telephone port
(PSTU, RSTU, KSTU3). Toshiba voice mail systems receiving DTMF B tone followed by
the station number may not know where the call is coming from - such as hold recall or
"blind" ring transfer recall.
When enabled (LED 20 ON), allows Toshiba voice mail systems to respond more
intelligently with appropriate voice prompts. Use this feature for standard telephone ports
connected to voice mail devices only, not for station ports connected to telephones. The
station number is not returned, it blind transfers to a DND station.
Note

LED 19: Toshiba Stratagy/VM (B No Station)

DTMF "B" tone is sent to Toshiba voice mail systems to signify a recall where Toshiba voice
mail systems already knows the recalling station number. Again, this allows Toshiba voice
mail systems to respond more intelligently with appropriate voice prompts. Use this feature
for standard telephone ports (PSTU, RSTU, KSTU3) connected to voice mail devices only,
not for station ports connected to telephones.

LED 18: Executive and Privacy Override Blocking (Modem)

When enabled (LED 18 ON), denies a station user the capability to break into a station
connection with Executive or Privacy Override. Use this feature for standard telephone ports
(PSTU, RSTU, KSTU3) connected to a modem, voice mail/auto attendant or ACD digital
announcement device in order to ensure data and voice security. Also, use this feature to deny
override of any station. This feature does not block Attendant Supervised Loop Monitoring.
You can use the Privacy Release 3ULYDF\ 5HOHDVH button to disable Privacy on a call-by-
call basis; this button does not disable Executive Override Blocking.

LED 17: End-to-end Signal RCV (VM)

When enabled (LED 17 ON), provides End-to-end Signalling of Dual-tone Multi-frequency
(DTMF) tones through the system. Required on all voice mail ports (RSTU, PSTU and
KSTU3) for proper signalling communication.

LED 16: Receive Voice Mail (VM) ID Code

When a station is call-forwarded to a VM system, certain identification (ID) DTMF tones are
automatically sent to direct the call to a specific mailbox (VM ID Code #656). The automatic
ID is also sent to the VM device when electronic, digital, or standard telephone users retrieve
messages via the Message Waiting buttons (VM ID Code #657). The VM port must be
programmed for this feature to allow the reception of VM ID DTMF digits.
Strata DK40 Programming Manual Spring 1999
announcer ports.
You must enable Toshiba Stratagy/Stratagy DK (B No Station) with LED 19 to
allow this function.
System & Station
3-67