Programs 71 ~ 75 Overview - Toshiba Strata DK40 Programming Manual

Programs 71 ~ 75 Overview

These programs are used to establish which station(s) are the member(s) of which group(s)
and are in turn, to ring with incoming DDI calls.
telephone number for each group. There are five categories of incoming ringing that can be
allocated for incoming DDI calls to groups. These are: DAY IMMEDIATE
DAY DELAY 1-12 second delay
73); DAY2 IMMEDIATE
station (port) is assigned to receive incoming DDI calls on a per group basis. i.e. the port is
selected in system programming and the LED's representing the group(s) the station is to be a
member of are lit. As described in
a station can be the member of more than one group. Stations can be assigned to be a member
of a group only after 12 or 24 seconds of incoming ringing, Day 2 or Night Service. If the
Night Service or three mode ringing (Program 10-2, LED 3 ON) features are used, when
invoked, any stations required to ring with incoming DDI calls to the relevant groups, must be
assigned to ring in Day 2 Immediate
Busy tone will be returned to the caller when Night Service is invoked if stations have been
assigned to ring in Programs 71-73 but not Programs 74 and/or 75.
Important! If a station is programmed to ring with incoming DDI calls in Programs 72 &
If more than one call to the same DDI number is to ring a station or stations in a group
Program 31, LED 11
Strata DK40 Programming Manual Spring 1999
(Program
(Program
Program
73 (Delay Options), but not Program 71, the call will follow the settings in
Program *17.
to enable call waiting for those stations.
See Program *09
72); DAY DELAY 2-24 second delay
74); and NIGHT IMMEDIATE
*09, groups may contain one or more stations and
(Program 74), or Night Service
System & Station
to assign the DDI
(Program 71);
(Program
(Program 75). Each
(Program 75).
see
3-165