Program 00 - Overview; Code 0, Rom Version; Code 1, Level 1 Security Code; Code 2, Level 2 Security Code - Toshiba Strata DK40 Programming Manual

Initialisation & Test

Program 00 - Overview

This program enables you to run various checks on the Strata DK40 System.
A KKYS, RKYS2 or RKYS3 feature key must be installed on the K5RCU PCB to allow AA,
AA & ACD, AA, ACD & MIS respectively.

Code 0, ROM Version

Code 0 displays the software version of the system common control unit DK40 Base KSU
and if installed on the K5RCU, the RKYS, KKYS key type.
Sheet for an illustration of software displays. This information cannot be altered with this
program.

Code 1, Level 1 Security Code

Use to assign a Remote Maintenance security code that allows entry to all programs and data.

Code 2, Level 2 Security Code

Use this program to assign a Remote Maintenance security code that allows entry to
Programs 04, 27, 30~39, 77~89.
Important!
Code 3, UK & Ireland A Law Set
This sets the system for A law operation. This must always have DATA=04 value set.

Code 8, Software RAM Checksum

For factory purposes only.

Code 9, Power Cycle Counter

This shows the number of the times the systems power has been cycled since the system was
initialised (using Program 91-9).

Program 00 Part 1 - Example

Action (press buttons + LED Buttons)
1. Use the programming LCD electronic or digital
telephone. (See "First-time Programming" on Page 1-18
for more information.)
& &4 5 6
2.
- - - -
Enter programming mode. (Do not press [DN] button.)
2-14
When using a DK Admin PC, either Security Code (1 or 2) enables the DK
Admin user full access to all Strata DK programs. Always change Security
Code 1 and Code 2 to prevent unauthorised programming changes by DK
Admin users that may try to log-in remotely with the default security code:
0000.
Program 00 Software Check
See the Program 00 Record
LCD Response
20 Jan Sun
Program Mode
Password = _____________
Strata DK40 Programming Manual Spring 1999
1
No. N-N
06:43