Download Print this page

Advertisement

726+,%$
Telecommunications Division
Installation & Maintenance
Manual
Spring 1999

Advertisement

   Related Manuals for Toshiba Strata DK40

   Summary of Contents for Toshiba Strata DK40

  • Page 1

    726+,%$ Telecommunications Division Installation & Maintenance Manual Spring 1999...

  • Page 2

    Publication Information © Copyright 1999 Toshiba Information Systems (UK) Ltd. Toshiba Information Systems (UK) Ltd. reserves the right to Telecommunication Division change any of this information including, but not limited to, product characteristics and operating specifications, without All rights reserved. No part of this manual, covered by the prior notice.

  • Page 3: Table Of Contents

    Power Failure Emergency Transfer Option ................. 2-19 Installing Power Failure Emergency Transfer ............... 2-19 Testing Power Failure Emergency Transfer ..............2-19 TOC-i Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 4: Table Of Contents

    TBSU Premise Wiring Guidelines ................. 2-41 Connecting TBSU to Network Side (TE-Mode) ............2-43 TBSU “TE” Mode Facilities ..................2-44 TOC-ii Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 5: Table Of Contents

    RSTU Standard Telephone Interface Unit ................3-25 R48S -48 Volt Supply Installation (Internal Option) ............ 3-25 External Options ......................3-26 RSTU2/PSTU2 Installation ................... 3-26 TOC-iii Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 6: Table Of Contents

    Standard Telephones ......................5-2 Telephone Installation ......................5-3 System Connection ......................5-3 Telephone Wall Mounting....................5-5 Telephone Upgrades ....................... 5-7 TOC-iv Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 7: Table Of Contents

    External Page/Door Lock Relay Options (PIOU, PIOUS, or PEPU)......6-10 Night Transfer/Night Relay Options with PIOU, PIOUS, or PEPU ......6-16 TOC-v Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 8: Table Of Contents

    Transfer From External AA to an ACD Group ..............7-7 Overflow From an ACD Group Queue ................7-7 ACD Group Status......................7-8 TOC-vi Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 9: Table Of Contents

    Linking ACT! 3.0 with StrataLink..................8-48 Installing ACT! 3.0 ......................8-49 Handling Outgoing Calls ..................... 8-53 Handling Incoming Calls ..................... 8-53 TOC-vii Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 10: Table Of Contents

    Figure 2-17 Standard Telephone Interface Subunit (KSTS3) ..........2-29 Figure 2-18 KSTU3/KSTS3 Installation ................2-31 Figure 2-19 DK40 Loop Start Exchange Line Board (TCOU) ........2-34 TOC-viii Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 11: Table Of Contents

    Location of LEDs and Connectors .............. 3-55 Figure 3-30 RBSU/RBSS Ferrite Core Installation ............3-57 Figure 3-31 RBSU to NT1 Point-to-point Connection ........... 3-58 TOC-ix Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 12: Table Of Contents

    Door Phone (DDCB or HDCB) Installation ..........5-26 Figure 5-15 Door Phone (MDFB) Installation ..............5-27 Figure 5-16 Digital Add-On-Module................5-30 Figure 5-17 Digital Add-On-Module(s) Default Button Assignments......5-31 TOC-x Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 13: Table Of Contents

    RS-232 Short-haul Line Driver ..............7-14 Figure 7-11 Twisted Pair Connections................7-15 Figure 8-1 Start Bar......................8-2 Figure 8-2 Control Panel ....................8-3 TOC-xi Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 14: Table Of Contents

    DK40 Line Capacities and Universal Printed Circuit Board Slots ....................1-6 Table 1-5 DK40 System Feature Capacities ..............1-6 Table 1-6 DK40 Station and Peripherals Capacities .............1-7 TOC-xii Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 15: Table Of Contents

    RBSU/RBSS, BRI-TE, and BRI-NT Maximums ........3-45 Table 3-14 RBSU/RBSS Option Switches, Jumpers, and Connectors ......3-50 Table 3-15 RBSU/RBSS LED Indications ..............3-53 TOC-xiii Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 16: Table Of Contents

    Voice Mail/(External) Auto Attendant Faults ........9-13 Flowchart 9-7 Station Message Detail Recording (SMDR) Faults........9-14 Flowchart 9-8 Remote Maintenance Faults ..............9-15 TOC-xiv Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 17: Base Key Service Unit (ksu)

    DK40 Configuration This chapter explains how to configure a Strata DK40 system. It also provides space to record the hardware and station devices that make up the system. Base Key Service Unit (KSU) Station and Exchange Lines The DK40 Base KSU can have up to eight digital telephone stations and four exchange lines (Table 1-1).

  • Page 18

    SMIS Choice of one: 25-pair MOH Source Control Amphenol Control Relay Night Bell Control BGM Mute Control *Customer-supplied equipment only Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 19: Expansion Ksu

    4 Exchange line circuits Loop calling Exchange lines Screw type connectors PACU 4 AC15 Tie line circuits AC15 Tie lines Screw type connectors Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 20

    ISDN30 (I421) PRI (up to 12 channels (maximum) RPTU a maximum of 12 ISDN 30 PRI from a network RJ45 provider. channels) Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 21: Peripherals

    Amplified page output (single zone, 3 watts) on the PIOU, PEPU is not available on the DK40. These functions are standard (built-in) to the DK40 Base KSU. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 22: Feature Capacities

    Simultaneous Party Conferencing (4-party) Simultaneous Two-Exchange Line conferencing (3-party) Station Speed Dial Personal Messages includes: timed reminder memo and station speed dial memo Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 23

    Off-premise stations RPCI used for TAPI only (per system) Speaker OCA stations Standard stations Telephones – DKT Telephones – EKT Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 24: Station Considerations

    Alternate BGM source KSTU3 Standard, one RSTU May require interface for the source PSTU2 transformer, See Chapter 6 – Peripheral Installation Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 25: Telephone Circuit (port) Types

    All three types of circuits are available with the Strata DK40. Digital Telephone Circuit Connections The Strata DK40 Base KSU and the PDKU2 PCB each provide eight digital telephone circuits. Digital Telephone Circuits Table 1-8 No.

  • Page 26: Electronic Telephone Circuit Connections

    Table 1-10 KSTU3 RSTU2 PSTU Standard Telephone Circuits (Base KSU) (Exp. KSU) (Exp. KSU) Number of Standard Telephone Circuits 1-10 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 27: Worksheet 1 – System Pcb Assignment Guide

    Each Tie line PCB installed provides four Tie lines (PEMU, PACU), and has station port range 028~039 assigned to Tie lines 1~12 respectively for programming purposes. 1-11 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 28

    Unit” on Page 3-29 for more information) Important! Toshiba strongly recommend that the RPTU PCB is installed in Slot 17. 1-12 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 29: Strata Dk40 Port Classification

    PTO Private Circuit services. Contains various ports for connection of audio paging PEPU amplifiers, dry relay contacts to control external SELV equipment. 1-13 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 30: Emc Compliance

    Humidity 10% to 80% Notes to Users: Safety Approval Toshiba Information System (UK) Ltd declare that the Strata DK40 complies with the EEC’s LVD directive, (Directive No. 73/23/EEC). The product has been assembled and found to comply with EN60950:1997. The notes listed below form part of the products compliance with the aforementioned European Norm.

  • Page 31

    Type Approval The Strata DK40 is classified as “Call Routing Apparatus” it is intended to be connected to the various Public Telecommunications Network Services for the purpose of generating and terminating “calls”.

  • Page 32: Table 1-13 Dk40 Tone Plan

    0.375s On/0.375s Off Extension Busy 4. 480/620Hz 0.25s On 0.25s Off NU/Reorder Tone 5. 440Hz 1s On Executive override 1-16 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 33: Table 1-14 System Port To Port Losses

    -5dB to -16dB TCOU1F RPTU1F/ RBSU1A/ 2dB to -10dB TBSU1A PEMU2F -3dB -2dB to -14dB PACU2F 9.6dB 0dB to -9dB 1-17 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 34

    DK40 Configuration Strata DK40 Port Classification 1-18 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 35: Inspection

    DK40 Installation This chapter explains how to install the Strata DK40 system. It includes information on site requirements, wiring diagrams, and step-by-step instructions on how to install the unit(s), the ground wiring, AC power cabling, reserve power (battery backup) cabling, and PCB cabling.

  • Page 36: Input Power

    Consider the following conditions when selecting a location for the KSU(s): The location must be: Dry and clean Well ventilated Well illuminated Easily accessible Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 37: Table 2-1 Summary Of Electrical/environmental Characteristics

    Subject to excessive vibration Next to television, radio, office automation, or high frequency equipment If reserve power is to be installed for the Strata DK40, the batteries will require a well- ventilated location close (within nine feet) to the DKSUB40 (the optional Toshiba-supplied battery cable is nine feet in length).

  • Page 38: Ac Power And Earthing Requirements

    9 CCS per station system-wide AC Power and Earthing Requirements The Strata DK40 requires an earth connection back to the main distribution point for proper operation and safety. Failure to provide this earth may be a safety hazzard or lead to confusing fault, or operational symptoms and,in extreme cases, system failure.

  • Page 39: Ac Power And "protective Earth" Test

    PBX or are in close proximity to the local exchange the PAD position may be required. TBSU: Set the TBSU PAD switches to the appropriate position for NT or TE operation. (See Figure 2-21). Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 40: Testing The System's Power Supply

    TPSU16 Circuit Breaker Reset Procedure Case 1 If the AC and DC LEDs on the TPSU16 power supply in the Strata DK40 Base KSU do not light, even though the AC power plug is inserted into the wall outlet and the TPSU16 DC power switch is turned on, the AC overvoltage circuit breaker may have opened.

  • Page 41: Mounting The Base Ksu

    Finish securing the unit to the mounting surface by completely screwing the bottom two screws into the wall. Earth the system according to “AC Power and Earthing Requirements” on Page 2-4. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 42: Mounting The Expansion Ksu

    Making sure that the Expansion KSU is flush against the mounting surface, mark the location of the Expansion KSU mounting screw hole. See Figure 2-3. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 43

    14. Plug the AC power cable into an outlet and then turn ON the power supply switch. 15. Install the side cover to the Expansion KSU. See Figure 2-11. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 44

    DKSUB40A Strata DK40 Label on edge of Base KSU 2160 Figure 2-5 Base KSU Exterior 2-10 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 45: Figure 2-6 Dk40 Base Ksu Interior

    Cable Cable Receptacle Music-on-Hold A/Mu Jumper Input Battery Jumper 1326 Music-on-Hold Sensitivity Adjustment Figure 2-6 DK40 Base KSU Interior 2-11 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 46

    MONITOR PFT contacts TBSU1A P121 Cct1Cct2 TB1 TB2 1632 Figure 2-7 Exchange Line Board Installation into DK40 Base KSU 2-12 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 47

    Cable (X5) DK40 Base KSU Amphenol PIN Jack Cord (X1) Cord (X2) 2161 Figure 2-8 Base KSU Cables and Connectors 2-13 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 48

    (from Expansion KSU – Plugs into Expansion Connector (P3) of Base KSU) 2162 Figure 2-9 Base to Expansion KSU Connection 2-14 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 49: Figure 2-10 Expansion Ksu Mounting And Connections

    Tie Wrap Holder Model DKSUE40A Strata DK40 Label on edge of Expansion KSU Figure 2-10 Expansion KSU Mounting and Connections 2-15 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 50: Figure 2-11 Expansion Ksu Slot Lock

    The DK40 Expansion Cabinet slot names are S15~S18. Table 2-2 provides the DK40 slot name. Table 2-2 DK40 Expansion Cabinet Slot Names DK40 Slot Name 2-16 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 51: Reserve Power Option

    Figure 2-12 System Power Supply Wiring The batteries require a well-ventilated location within 3m of the system (the interface cable is 3m long). 2-17 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 52: Reserve Power Installation

    Plug reserve battery cable into BATT connector of power supply. 2-18 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 53: Power Failure Emergency Transfer Option

    Connection Standard Telephone Screw Terminal 2155 PF1 (Base KSU) Figure 2-13 Base KSU Power Failure Transfer (PFT) Circuit Diagram 2-19 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 54: Power Supply Removal And Replacement

    Unplug the AC power cord from PN2. Remove the eight screws that attach the power supply to the Base KSU. Remove the power supply. 2-20 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 55: Power Supply Replacement

    Plug the Expansion KSU green/yellow ground wire into FG2. Printed Circuit Board (PCB) Installation This section details Strata DK40 system PCBs installation into the Base KSU. Also described are optional configuration information and programming considerations for each PCB. For all PCB installation options for the Expansion KSU, See Chapter 3 –...

  • Page 56: Expansion Ksu Pcbs

    (related to connection of peripheral equipment, such as background music, voice mail, etc.). Hardware and software options for each PCB are identified in the individual PCB installation procedures in this chapter. 2-22 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 57: Pcb Installation/power Supply Considerations

    PDKU. The motherboard does not have to be configured for the digital circuits to operate. For wiring see Figure 2-28. 2-23 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 58: K5rcu

    Program 15: Sets K5RCU operation after exchange line recall. Assigns DTMF dialling, DISA, and additional attributes to each line. 2-24 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 59: Feature Key Upgrades (kkys, Rkys2 & 3)

    (See Figure 2-15.) KKYS Installation Install the KKYS onto the K5RCU3 to add the optional built-in auto attendant feature. 2-25 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 60: Rkys2/rkys3 Auto Attendant And Acd

    Table 2-4 RKYS Features PCB Name Description of Features RKYS2 Enables Auto-Attendant & ACD RKYS3 Enables Auto-Attendant, ACD & MIS 2-26 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 61: Kstu3 Four-circuit Standard Telephone Interface Unit

    Connect the green and yellow earth wire with the two pronge spade by slipping it under the FG1 or FG2 screw terminal on the power supply unit. 2-27 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 62: Kstu3 Wiring

    Cct 1 - NT 18~19 20~23 Cct 2 - TE Cct 1 - NT 18~19 22~25 Cct 2 - NT 20~21 2-28 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 63: Figure 2-16 Standard Telephone Interface Board (kstu3)

    KSTU3F 1629 Figure 2-16 Standard Telephone Interface Board (KSTU3) 1630 KSTS3A (reverse) Figure 2-17 Standard Telephone Interface Subunit (KSTS3) 2-29 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 64: Table 2-6 Kstu3 Controls And Interface Connectors

    3-pin jumper A or Mu law switch. Must be set to A law for correct operation in the UK. 2-30 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 65: Figure 2-18 Kstu3/ksts3 Installation

    KSTU3 Four-circuit Standard Telephone Interface Unit DK40 Installation KSTU3F KSTS3F KSTU2A KSTU2A 1633 Figure 2-18 KSTU3/KSTS3 Installation 2-31 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 66: Exchange Line Interface Unit

    Pull back the three plastic stand-off tabs and pull up on the TCOU until P110, P111 and P112 are unplugged. 2-32 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 67: Tcou Programming

    Programs 81~89 Assigns lines to ring selected stations. Assigns Delayed Ringing to any line. Program 93: Assigns names to lines. 2-33 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 68: Figure 2-19 Dk40 Loop Start Exchange Line Board (tcou)

    A or Mu law switch. Must be set to A law for 3-pin jumper correct operation in the UK 2-34 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 69: Two-circuit Isdn Bri Interface Unit

    BRI circuit. The contention rule for the two BRI B-channels is first come, first served. 2-35 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 70: Capacity And Cabinet Slot Information

    18 ~ 19 Circuit 2 - NT 2 Station Ports 20 ~ 21 * TBSU circuits can be NT or TE. 2-36 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 71: Tbsu Installation

    Programs 71~75: Assigns the stations that are to be members of the system groups nominated (as per the settings in Program *09). 2-37 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 72: Figure 2-21 Tbsu Pcb

    RESET SW200 NT TE Cct1 SW100 Cct2 MONITOR PFT contacts P121 TBSU1A Cct1Cct2 TB1 TB2 Figure 2-21 TBSU PCB 2-38 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 73: Table 2-9 Tbsu Option Switches, Jumpers, And Connectors

    After the TBSU is installed in the DK40 Base KSU cabinet, the status LEDs and connecting jacks are positioned as shown in Figure 2-21 2-39 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 74: Modular Jack Pin Configurations

    NT Mode 87654321 3048 Front View of RJ-45 Jack Cavity Note: The RJ-45 pins are numbered as shown above. 2-40 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 75: Tbsu Premise Wiring Guidelines

    The standard pinouts for ISDN jacks are as per the list in Table 2-12. 2-41 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 76: Table 2-12 Rj-45 Jack – Isdn Standard Interface Modular Connector Pinout (tbsu-te Mode)

    To ensure that the TBSU circuits meet the EMC requirements, it is necessary to run all wire connecting TBSU circuits (TE mode and NT mode) through a Ferrite core. Use Toshiba part number, 093-1050/02, which is shipped with the TBSU.

  • Page 77: Connecting Tbsu To Network Side (te-mode)

    The TR must be switched into the TBSU TE circuit (refer to option switches in Table 2-9 on Page 2-39) and into the NT1 device. 2-43 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 78: Tbsu "te" Mode Facilities

    TBSU NT! Demarcation Point Note: T is an ISDN standard reference point. Figure 2-23 TBSU to NT1 Point-to-point Connection 2-44 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 79: Connecting Tbsu Station Devices (nt-mode)

    TE and TA devices on the S bus is limited by timing 2-45 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 80: Tbsu "nt" Mode Facilities

    Figures 2-25 2-26 provide examples of BRI call setup message information that is available from the TBSU call-monitor jack. 2-46 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 81: Figure 2-25 Outgoing Call Setup Output Of Bri Call Monitor

    <U1>27;04'966 S L3_DL_DIS <U1>27;05'055 R L3_BSY_OFF 000 Outgoing Call Setup BRI Figure 2-25 Outgoing Call Setup Output of BRI Call Monitor 2-47 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 82: Figure 2-26 Incoming Call Setup Output Of Bri Call Monitor

    <U2>29;22'135 S TERM NOT EXT 000 Incoming Call Setup BRI Figure 2-26 Incoming Call Setup Output of BRI Call Monitor 2-48 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 83: Tbsu Performance Monitoring Via Dk40 Remote Programming

    CLOCK SOURCE LOST - The I/C timing source has been lost on an ISDN circuit. 2-49 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 84: Figure 2-27 Tbsu Performance Monitor Output

    To exit the dump mode > > QUIT Enter Return MODE At the prompt, type , press ); the prompt displays. 2-50 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 85: Universal Slot Pcbs

    Universal Slot PCBs DK40 Installation Universal Slot PCBs The following PCBs can be used in the universal slots of the Strata DK40 Expansion KSU (see Table 2-13). Table 2-13 Universal Slot PCB Descriptions Title Description Page PPACU AC15 Tie line unit...

  • Page 86: Sub Assemblies For Universal Slot Pcbs

    ISDN BRI circuits (4 B channels). DC40v power supply unit for fitting on R40S1 RBSU one per RBSU RBSU1A. Supplies PSI to ISDN TE. 2-52 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 87: Loop Limits

    Cable splits (single or double) Cable bridges (of any length) High resistance or faulty cable splices Use CW1308 0.5mm twisted pair cable 2-53 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 88: Mdf Wiring Diagrams

    MDF Wiring to Exchange Lines and Digital Telephones (TCOU) See Chapter 4 – DK40 Universal Slot PCB Wiring Diagrams for information on universal PCB wiring. 2-54 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 89

    Circuit 4 1679 Digital Telephone (DKT 8) Figure 2-28 MDF Wiring to KSU & Amphenol Station and Relay Connectors 2-55 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 90: Figure 2-29 Mdf Wiring To Exchange Lines And Digital Telephones (tcou)

    HPTB TCOU Only Power Failure Standard Telephone 1680 Figure 2-29 MDF Wiring to Exchange Lines and Digital Telephones (TCOU) 2-56 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 91

    RPTU ISDN30 Primary Rate Interface Unit (maximum 12 channels) RBSU1 ISDN BRA Interface Unit-2 circuit (4 B channels) TE/NT switchable Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 92

    DC40V power supply unit for RBSU1 - supplies PS1 to ISDNTE RSTU2 Standard Telephone Interface Unit R48S Sub-Assembly Unit for RSTU-48Vdc supply Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 93: Pcb Chapter Layout

    Compatible Slot(s): Which system slot(s) the PCB can be installed into. Older Version(s): Describes older version or versions of the PCB. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 94: Pdku2 Digital Telephone Interface Unit

    For RPCI-DI TAPI mode only and Handset OCA, code 61 can be used and the PDKU2 can be in any universal cabinet slot. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 95

    Program 92-5: Initialises initial ringing, speaker, and muted ring volume levels of digital telephones. Backplane Connector 1371 50-Pin Female Amphenol Connector Figure 3-1 PDKU2 PCB Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 96: Peku Electronic Telephone Interface Unit

    (including the following upgrades: HVSU2 or HVSU, HVSI for Off-hook Call Announce and HHEU for headset and/or loud ringing bell interface) and external options, respectively. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 97: Peku Configuration To Support An Hdss Console Option

    91- 9 can be run instead. Programs 28 and 29: HDSS console assignments. Programs 77-1, 77-2, 79: HDCB and door phone ringing assignments Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 98: Table 3-1 Peku Controls, Indicators, And Connectors

    W9, cut for HDCB option W5, cut for BGM option 1372 50-Pin Amphenol Connector (Female) Figure 3-3 PEKU Printed Circuit Board Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 99: Pepu External Page Interface Unit

    After installing the PEPU, gently pull the PCB outward. If the connectors are properly mated, a slight resistance is felt. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 100: Pepu Programming

    Trim potentiometer Not used in DK40. Backplane Connector 1390 50-Pin Female Amphenol Connector Figure 3-4 PEPU Printed Circuit Board 3-10 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 101: Piou, Pious Option Interface Units

    PIOU or PIOUS connectors P1, P2, and P3 are positioned to allow installation of the IMDU only in the proper position. 3-11 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 102: Piou, Pious Installation

    DK40 Universal Slot PCBs PIOU, PIOUS Option Interface Units Refer to the Strata DK40 Programming Manual and turn LED 14 on in Program 77-1 to enable IMDU operation. Note The IMDU default station intercom or [DN] is #19. Apply firm, even pressure to the IMDU to ensure proper mating of connectors.

  • Page 103: Piou, Pious Programming

    Not used on DK40. A or Mu law switch. Must be set for A law 3-pin jumper operation in th UK. 3-13 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 104: Figure 3-6 Piou Printed Circuit Board

    Optional IMDU PCB Remote Maintenance BREAK MAKE Modem BREAK Terminal Strip Backplane Connector PIOUS 1389.eps Figure 3-7 PIOUS Printed Circuit Board 3-14 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 105: Table 3-4 Pious Controls, Indicators, And Connectors

    A or Mu law switch. Must be set for A 3-pin jumper law operation in th UK. *Top modular is TTY and bottom modular is SMDR. 3-15 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 106: Pcou Exchange Line Interface Unit

    After installing the PCOU, gently pull the PCB outward. If the connectors are properly mated, a slight resistance will be felt. 3-16 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 107: Pcou Programming

    Programs 81 ~ 89: Assigns lines to ring selected stations. Assigns Delayed Ringing to any line. Program 93: Assigns names to lines. 3-17 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 108: Table 3-5 Pcou Controls, Indicators, And Connectors

    Screw Terminals for Lines 1-4 Modular Socket for Power Fail Connection Earth Screw for Signalling Figure 3-8 PCOU Printed Circuit Board 3-18 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 109: Pacu Ac15 Tie Line Unit

    DTMF receiver unit (K5RCU) must be installed on the DK40 Base KSU. The Strata DK40 assigns one station port number to each Tie line connected. These station port numbers are only available in order to program certain attributes to the Tie lines connected to the PACU, PEMU PCBs, (i.e.

  • Page 110: Pacu Programming

    Programs 50~56: Assigns LCR, if using the network as a route operation. Program 93: Assigns a name to a tie line 3-20 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 111: Figure 3-9 Pacu Control, Indicator And Interface Connectors

    1380 Screw Terminals for Tie Lines 1-4 TT & TR = Transmit Pair RT & RR = Receive pair 3-21 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 112: Pemu Dc5 Tie Line Unit

    DTMF Receiver Unit (K5RCU) must be installed on the DK40 Base KSU. The Strata DK40 system assigns one station port number to each Tie Line connected. These station port numbers are only available in order to program certain attributes to the Tie Lines connected to the PEMU, PACU PCBs, (i.e.

  • Page 113: Pemu Programming

    Programs 50~56: Assigns LCR, if using the network as a route option. Program 93: Assigns a name to a tie line 3-23 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 114: Figure 3-10 Pemu Printed Circuit Board

    C & D = Receive Pair 4 WIRE, E & M 2 WIRE, E & M Figure 3-10 PEMU Printed Circuit Board 3-24 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 115: Rstu Standard Telephone Interface Unit

    RSTU connectors P6 and P7 are positioned so that the R48S only fits in the proper position. Figure 3-11 R48S Interface Connectors 3-25 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 116: External Options

    Interface connector to P6 of R48S. R48S connector P7 (RSTU2 only) 6-pin connector Interface connector to P7 of R48S. 3-26 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 117: Figure 3-12 Pstu And Subunit (sstu)

    R48S Installed on RSTU2 R48S RSTU2 1376 Optional 50-Pin Amphenol Connector (Female) Figure 3-13 RSTU2 Controls and Interface Connectors 3-27 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 118: Rstu2 Programming

    Program 10-3, 23, 24, 25, 26: Integrated Auto Attendant Digital Announcer assignments. Program 31: Configures all RSTU2 and PSTU ports connected to voice mail or external Auto attendant devices. 3-28 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 119: Rptu Isdn Primary Rate Interface Unit

    DK40 system. Program 03, code 76 designates which cabinet slot contains the RPTU PCB. 3-29 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 120: Rptu Installation

    Program *62-1~3: Assigns a Bearer Service and Transmit and Receive levels for analogue station to Digital trunk connections 3-30 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 121: To Install The Rptu Pcb

    After installing the RPTU, gently pull the PCB outward. If the connectors are properly seated, a slight resistance is felt. Note For cabling information and requirements, refer to “Cabling” on Page 3-34. 3-31 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 122: Figure 3-14 Rptu Printed Circuit Board

    Secondary Clock source PCB (Program *42-2). If this switch is pressed, the Primary Timing Source must be re-assigned in system programming. 3-32 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 123: Table 3-12 Led Functions

    ON: Incoming signal cannot be detected. OFF: Circuit is working properly. Reset ON: CPU is resetting the software. OFF: Circuit is working properly. 3-33 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 124: Cabling

    The RPTU PCB is shipped with a cable kit (Part No.093-1050/02) for connection of the RPTU to to the NTE. Install the kit as shown in Figure 3-16. 3-34 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 125

    Five metres of CAT5 shielded cable One Ferrite core *Cable A is straight-pinned data cables, not cross-pinned telephony cables. Figure 3-16 Cable Kit 3-35 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 126

    Note: The RJ45 pins are numbered Not Used as shown above. Not Used Figure 3-17 Detailed Pinouts for ISDN PRI Cabling 3-36 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 127: Timing And Synchronization

    If a malfunction occurs and Primary reference synchronization is lost, the DK40 automatically switches modes and synchronizes to the Secondary reference, provided that 3-37 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 128

    3-38 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 129: Rptu Call Monitoring (pri)

    The call-m onitor jack on each PC B provides data only for the c ircuits of the P CB on w hich it appears. Figure 3-20 Call-monitor Jack for the RPTU and RBSU 3-39 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 130

    <U1>00;14'894 Tx :[SAPI]00 R [TEI]000 [FRAME]RR F [N(R)]000 <U1>00;14'896 Rx:[SAPI]00 R [TEI]000 [FRAME]RR F [N(R)]000 Setup PRI Figure 3-21 Start-up and Synchronization Sequences 3-40 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 131

    <U1>02;04'172 Rx:[SAPI]00 R [TEI]000 [FRAME]RR F [N(R)]011 Outgoing Rel and Con PRI Figure 3-22 Outgoing Call Connect and Release 3-41 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 132: Performance Monitoring

    CLOCK SOURCE LOST - The I/C timing source has been lost on an ISDN circuit. 3-42 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 133

    To exit the dump mode > > QUIT Enter Return MODE At the prompt, type , press ); the prompt displays. 3-43 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 134: Rbsu/rbss Isdn Basic Rate Interface Unit

    B-channels. That is to say, a maximum of two simultaneous voice and/or data calls are allowed between both devices connected to 3-44 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 135

    Also the DK40 system must have battery backup to allow the R40S power backup function to operate. The R40S power supply is an ISDN, PS-1 type power unit which means it supplies 3-45 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 136: Rbsu/rbss Installation

    Program 14-0: Assigns incoming ringing to ACD group (DEL mode only) Program 16: Assigns the ISDN2 channels to line groups 3-46 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 137

    RBSS onto the RBSU or inserting the RBSU into the system. Switch/jumper information and locations are shown in Figures 3-26, 3-27, and Table 3-14. 3-47 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 138

    RBSU/RBSS ISDN Basic Rate Interface Unit RBSU1A contacts TB1 TB2 R BS U1 A-C M V. 2 2789 Figure 3-26 RBSU PCB 3-48 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 139: Figure 3-27 Rbss Pcb

    RBSU/RBSS ISDN Basic Rate Interface Unit DK40 Universal Slot PCBs RBSS 2788 Figure 3-27 RBSS PCB 3-49 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 140: Table 3-14 Rbsu/rbss Option Switches, Jumpers, And Connectors

    Connects the RBSS Cct 2 to the Connector RJ45 Network Provider Interface Also requires Program *60 to be set for TE or NT. 3-50 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 141

    Align the two connectors carefully while observing the “UP” arrows on the R40S. Plug the R40S onto the RBSU. 3-51 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 142: Figure 3-28 Location Of Rbsu Plug-on Pcbs

    (always install) Two-circuit Subassembly 2761 Optional PS-1 Power Supply R40S1A-CM V.1 R40S Figure 3-28 Location of RBSU Plug-on PCBs 3-52 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 143: Table 3-15 Rbsu/rbss Led Indications

    OFF – Normal condition. Frame Alignment Alarm ON – Frame alignment cannot be established. OFF – Frame alignment is established. 3-53 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 144

    Side Polarity 87654321 3048 Front View of RJ45 Jack Cavity Note: The RJ45 pins are numbered as shown above. 3-54 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 145: Rbsu/rbss Premise Wiring Guidelines

    TB2. The specifications for TB1 and TB2 contacts are: Maximum switchable voltage: 30 VDC Maximum switchable current: 80mA Short circuit resistance: Approximately 15 ohms 3-55 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 146: Table 3-17 Rj-45 Jack – Isdn Standard Interface Modular Connector Pinout (rbsu-te Mode)

    + Power 2 (not used on DK RBSU/RBSS) Notes Pins are numbered left to right when looking into the jack cavity with the locking tab. down. 3-56 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 147

    Locate the Ferrite core One Turn as close as possible to the RBSU/RBSS. Figure 3-30 RBSU/RBSS Ferrite Core Installation 3-57 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 148: Connecting Rbsu To Network Side (te-mode)

    TAs also enable you to connect standard telephones and non-ISDN fax machines to receive and make calls over ISDN circuits. TEs include any user device (telephone, fax, PC video 3-58 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 149: Figure 3-32 Rbsu/rbss Nt Circuit Pinout On Passive Bus

    The correct placement of TRs on the passive bus is critical to ISDN BRI circuit operation (See “RBSU/RBSS Passive Bus Configurations” on Page 3-60). 3-59 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 150: Rbsu/rbss Passive Bus Configurations

    Figures 3-33 3-34 provide examples of BRI call setup message information that is available from the RBSU call- monitor jack. 3-60 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 151: Figure 3-33 Outgoing Call Setup Output Of Bri Call Monitor

    <U1>27;04'966 S L3_DL_DIS <U1>27;05'055 R L3_BSY_OFF 000 Outgoing Call Setup BRI Figure 3-33 Outgoing Call Setup Output of BRI Call Monitor 3-61 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 152: Figure 3-34 Incoming Call Setup Output Of Bri Call Monitor

    <U2>29;22'135 S TERM NOT EXT 000 Incoming Call Setup BRI Figure 3-34 Incoming Call Setup Output of BRI Call Monitor 3-62 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 153

    Universal Slot PCB Wiring This chapter contains point-to-point wiring diagrams for connection of telephones, lines, peripheral equipment, and power supplies for the universal slot PCBs of both the Strata DK40 Expansion KSU. Wiring diagrams are divided into groups according to the PCB which provides the interface...

  • Page 154: Station Wiring Diagrams

    B, PB = 0.0 VDC (GND). Reference to SG ground. Figure 4-1 MDF Wiring for Digital Telephones (DKTs) and DDSS Console to PDKU Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 155: Figure 4-2 Mdf Wiring-ddcb/door Phone/lock To Pdku

    5 of the first or second PDKU in the Expansion KSU. Figure 4-2 MDF Wiring-DDCB/Door Phone/Lock to PDKU Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 156: Figure 4-3 Pdku Station Mdf Cross Connect Record

    Indicate if digital telephone (with or without RPCI-DI), DSS console (number 1~3), or DDCB is connected. Figure 4-3 PDKU Station MDF Cross Connect Record Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 157: Electronic Station Wiring Diagrams

    Circuit 7 GN-V Ringing Bell option. V-BR Circuit 8 BR-V Not Used 1578 Figure 4-4 MDF Wiring/Electronic Telephone to PEKU Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 158: Figure 4-5 Mdf Wiring/hdss Console And Associated Ekt To Peku

    • See Program 29 to assign HDSS feature buttons. • See Program 28 for telephone to HDSS assignments. Figure 4-5 MDF Wiring/HDSS Console and Associated EKT to PEKU Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 159: Figure 4-6 Mdf Wiring-door Phone To Peku

    Not Used depend on whether a DDCB is installed in the Base KSU. 1580 Figure 4-6 MDF Wiring-Door Phone to PEKU Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 160: Figure 4-7 Peku Station Mdf Cross Connect Record

    Indicate if electronic telephone or HDCB (HDCB: Circuit 5, PEKU PCB). Indicate if electronic telephone or HDSS Console number (1~8). Figure 4-7 PEKU Station MDF Cross Connect Record Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 161: Analogue Devices Wiring

    V-BR -24 Volts BR-V (J1, 50) (J1, 25) -24V 1583 Figure 4-8 MDF Wiring/Standard Telephone, Voice Mail, DPFT to RSTU2/PSTU2 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 162: Figure 4-9 Rstu2//pstu2 Station Mdf Cross Connect Record

    Indicate if separate BGM source. Note Indicate if standard telephone, voice mail port, etc. Figure 4-9 RSTU2//PSTU2 Station MDF Cross Connect Record 4-10 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 163: Power Failure Cut Through (dpft) Wiring Pin-outs

    Spare Spare Spare V-Br Spare Br-V Spare Spare Spare Figure 4-10 DPFT Connector J2/Terminal Sequence & Designations/Station Line Connection 4-11 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 164: Figure 4-11 Dpft Connector J1/terminal Sequence & Designations/exchange Line Connection & Dpft Control

    PFT -24V PFT -24V (INPUT) RSTU/PSTU/PIN25 Figure 4-11 DPFT Connector J1/Terminal Sequence & Designations/Exchange Line Connection & DPFT Control 4-12 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 165: Exchange Line Wiring Diagrams

    (2 = -24 & 4 = GRD) PCOU Only Power Failure Standard Telephone 1586 Figure 4-12 MDF Wiring/Exchange Lines to PCOU 4-13 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 166: Figure 4-13 Mdf Wiring/2-wire Tie Line To Pemu

    DK Wire Pair Functions DK, Transmit DK, Receive Signalling E1, M1 1587 Figure 4-13 MDF Wiring/2-Wire Tie Line to PEMU 4-14 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 167: Figure 4-14 Mdf Wiring/4-wire Tie Line To Pemu

    DK, Transmit T1, R1 DK, Receive C1, D1 Signalling E1, M1 1588 Figure 4-14 MDF Wiring/4-Wire Tie Line to PEMU 4-15 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 168: Figure 4-15 Mdf Wiring Ac15 Tie Lines To Pacu

    DK Wire Pair Functions DK, Transmit TT1, TR1 DK, Receive RT1, RR1 1589 Figure 4-15 MDF Wiring AC15 Tie Lines to PACU 4-16 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 169: Figure 4-16 Piou/tty And Smdr Wiring (with Pptc Adapter)

    Sets the IMDU and TTY jack for bell or CCITT specification. This must be CCITT for UK operation. Figure 4-16 PIOU/TTY and SMDR Wiring (with PPTC Adapter) 4-17 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 170: Figure 4-17 Pious Smdr/tty Options And Wiring (with Pptc Adapter)

    CCITT specification. This must be CCITT for UK operation Figure 4-17 PIOUS SMDR/TTY Options and Wiring (with PPTC Adapter) 4-18 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 171: Figure 4-18 Dk Rs-232 Modular Adapter Pin Configuration

    The above modular adapters can be used to connect PCs, terminals and SMDR devices to PIOU, and PIOUS RS-232 ports. All DB9/25 cable connections require a 6-wire modular cord. Figure 4-18 DK RS-232 Modular Adapter Pin Configuration 4-19 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 172

    DK40 Universal Slot PCB Wiring Exchange Line Wiring Diagrams 4-20 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 173: Types Of Telephones

    Station Apparatus This chapter provides instructions on how to connect telephones to the Strata DK40 system and how to configure and upgrade them for optional features. Procedures for installing direct station selection consoles and door phones also appear in this chapter.

  • Page 174: Electronic Telephones

    Customer supplied two wire devices (ie fax, modems, voice mail systems) or standard telephones apply whenever standard telephones are mentioned in this manual. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 175: Telephone Installation

    10 metres and has a BS6312 type connector at the LJU end of the lead. See Chapter 4 – DK40 Universal Slot PCB Wiring for more details. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 176: Standard Telephones

    1200 ohms for RSTU with 48 volt loop (R48S installed on RSTU PCB), including the telephone resistance. This also applies to all devices connected to standard telephone circuits. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 177: Telephone Wall Mounting

    Route the cord into the hollow portion of the base. Mount the phone on the wall mounting modular connector plate. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 178

    Station Apparatus Telephone Installation Handset Hanger 1479 Figure 5-2 Handset Hanger 1480 Figure 5-3 Wall Mounting Base Rotation Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 179: Telephone Upgrades

    See Chapter 8 – Computer Telephony Integration for more information. A RPCI-DI can be connected to any digital telephone circuit. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 180: Telephone Speaker Off-hook Call Announce Upgrade (dvsu)

    DVSU. An additional wire pair is not required for digital telephones that receive Speaker OCA calls. The DVSU is compatible with the 2000-series digital telephones. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 181

    Reinstall the telephone base and secure it with its four captive screws. Note The DKT2001-F will not support the DVSU. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 182

    W101 W102 EX.POW W409 Carbon W201 W202 BEEP W204 W204 EX.SP 1484 Figure 5-6 DKT2010-FH Strap and Connector Locations 5-10 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 183: Loud Ringing Bell/t001b Headset Upgrade (hheu)

    V.4 HHEU1, except that the HHEU2 has longer wires to accommodate wall mounting. A Toshiba HESC-65A cable is required to connect the HHEU in a digital telephone to the HESB. 2000-series digital telephones can support an HHEU and a RPCI-DI at the same time.

  • Page 184

    5-8). V.4 HHEU1 and HHEU2 do not have this switch, because both of these upgrades are automatically set for the headset/loud bell application. 5-12 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 185: Figure 5-9 Hesc-65a Cabling

    PCB in the telephone. Cut the strap if an HESB will be connected to the HHEU. 5-13 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 186: Carbon Headset/handset Straps

    5-7, and cut the beep strap. Reinstall the telephone base, and secure it with its four captive screws. 5-14 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 187: Microphone/speaker Sensitivity Adjustment (speakerphones Only)

    R607 is cut on the HHEU PCB and the HHEU strap is cut on the telephone. (See “Loud Ringing Bell/T001B Headset Upgrade (HHEU)” on Page 5-11 for more information.) 5-15 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 188: External Power Straps

    See Notes in “Telephone Speaker Off-hook Call Announce Upgrade (DVSU)” on Page 5-8. Handset OCA is not available on electronic telephones. 5-16 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 189: Figure 5-10 Hvsu Installation For Electronic Telephones

    Position the HVSU2 on the standoffs inside the base, and secure with the two provided screws (Figure 5-10). 5-17 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 190: Figure 5-11 Electronic Telephone Pcb Connections

    To HVSU (6520-SD) Carbon Connector, P2 Carbon Straps W201 W202 HHEU Strap W203 1490 Figure 5-11 Electronic Telephone PCB Connections 5-18 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 191: Figure 5-12 Hvsi/hvsu Installation For Electronic Telephones

    Connect the HVSU/HVSI subassembly wire plug to the P2 connector on the electronic telephone PCB (Figure 5-11). Reinstall the electronic telephone base, and secure it with its four captive screws. 5-19 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 192

    (HHEU1A V.1 ~V.3) Connector of Telephone OCA (HHEU1 V.4 or HHEU2) P601 HHEU 1492 Figure 5-13 HHEU Installation for Electronic Telephones 5-20 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 193

    Adjust the volume control on both the back of the HESB and the ring volume control on the telephone. 5-21 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 194

    HI (high) position (Figure 5-11). Reinstall the telephone base and secure in place using the four captive screws. 5-22 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 195: Direct Station Selection (dss) Console/system Connection

    Program 03: Code 64 identifies the slots that support DDSS consoles. Program 28: Assigns DDSS console(s) to telephones. Program 29: Assigns button functions for DDSS consoles. 5-23 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 196: Hdss Console

    Program 28: Assigns HDSS console to a telephone. Program 29: Assigns individual button functions for the HDSS console. 5-24 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 197: Door Phone (mdfb)

    Chapter 4 – DK40 Universal Slot PCB Wiring. If using CW1308 cable, the length of the cable run from the Strata DK40 to the MDFB (via the DDCB or HDCB) must not exceed 305 metres. DDCB or HDCB cable runs must not have cable splits (single or double), cable bridges (of any length) or high resistance or faulty cable splices.

  • Page 198: Ddcb/hdcb Wall Mounting

    Position the DDCB or HDCB adjacent to the Base KSU with regard to wiring needs. Secure the DDCB or HDCB to the mounting surface with four one-inch panhead wood screws. 5-26 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 199: Mdfb Wall Mounting

    MDFB or while on a call with it. The volume level will change as the screw is turned. 5-27 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 200: Door Phone/lock Programming

    (Chapter 6 – Peripheral Installation for HDCB, DDCB, and PIOU/ PIOUS door lock installation information). Program 79: Assigns door phone-to-station ringing assignments. 5-28 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 201: Digital Add-on Module Installation

    Figure 5-16 to connect P1 of the second DADM to P2 of the first DADM with the DADM connecting cable. 5-29 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 202: Figure 5-16 Digital Add-on-module

    P1 of Bottom PCB 2000-Series Digital Telephone DADM2020 DADM2020 2000-Series DKT View of Bottom 1495 Figure 5-16 Digital Add-On-Module 5-30 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 203: Adm Programming

    DADM. See the Strata DK40 programming record sheets in the Strata DK40 Programming Manual for button defaults. 5-31 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 204

    Station Apparatus Digital Add-on Module Installation 5-32 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 205: Power Failure Options

    The DPFT is normally installed on the MDF. Figure 6-1 provides a circuit diagram of the DPFT. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 206: Power Failure Emergency Transfer (dpft) Installation

    DPFT J1-block “PCOU-A” and “PCOU-B” terminals. Connect the standard telephone stations selected for emergency use to the DPFT J2- block “TEL-A” and “TEL-B” terminals. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 207: Music-on-hold (moh)/ Background Music (bgm) Options

    EN60950 requirements for SELV circuiting. Any equipment connected to these ports must have an equipment classification. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 208

    MOH is also applied through the DK40 KSU CTU, Page/BGM control to provide BGM to electronic/digital telephone speakers and external page (see Figure 6-2). Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 209: Figure 6-2 Music-on-hold And Background Music (same Source) Functional

    PIOU/PIOUS/PEPU MOH/NT relay can be used to control MOH. Figure 6-2 Music-on-Hold and Background Music (same source) Functional Diagram Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 210: Bgm Options

    BGM source is sent directly to electronic/digital telephone speakers and to the external page system via the DK40 BGM 600 ohm RCA jack. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 211: Figure 6-4 Dk40 Alternate Bgm Source To Standard Telephone Port Connection

    Slot XX* Backplane Wiring Installation Wiring 1504 * Program 19 Assigns Slot XX Figure 6-5 DK40 Alternate BGM Source Configuration B Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 212

    Backplane Wiring Installation Wiring 2. Program 19 assigns BGM Slot number. 1506 Figure 6-6 DK40 Alternate Music Source Configuration C Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 213: Alternate Bgm Source Installation

    The external BGM options are closely associated with the external paging options. Refer to “External Page Options” on Page 6-28 for external paging amplifier installation. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 214: Relay Control Options And Door Lock Control

    MAKE–Shorts the normally open contacts (pins 7 and 32) when external page is activated. BREAK–Opens the normally closed contacts (pins 7 and 32) when external page is activated. 6-10 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 215

    Connect the PIOU, PIOUS, or PEPU to the MDF as required for the external paging function. 6-11 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 216: Figure 6-7 Piou/pepu Relay Control Functional Wiring Diagram

    EN60950 Classification as the DK40. This port must therefore be of a SELV (Safe Extra Low Voltage) Classification. Figure 6-7 PIOU/PEPU Relay Control Functional Wiring Diagram 6-12 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 217

    • K2 (NH): Night Relay or Music-on-Hold Control; Program 77-1, LED 05 • K1 & K2: 24VDC, 1 amp Maximum Figure 6-8 PIOUS Relay Control Functional Wiring Diagram 6-13 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 218

    K1/P10 (24VDC, 1.0 amp Max.) Terminal on Front Edge of PCB 1509 Figure 6-9 Door Lock Control Option (PIOU/PIOUS/PEPU) 6-14 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 219: Table 6-1 Ddcb Drlk Assignments Guide

    10. Check each telephone door lock button from each station: the DDCB modular B-jack (pins 3 and 4) will momentarily open or close (three or six seconds) when the button is pressed. 6-15 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 220: Night Transfer/night Relay Options With Piou, Pious, Or Pepu

    When configured for the MOH function with Program 77-1, the relay activates any time an Exchange line is on hold. In this configuration, the relay is normally used to control the MOH source. 6-16 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 221

    Assign in Programs 29-1~29-4 a 1LJKW 7UDQVIHU button on all direct station selection consoles that are to transfer the Strata DK40 system into the Night mode. If tenant operation is required, set in Program *15 the exchange lines for tenant 1 through tenant 4 operation.

  • Page 222

    Night transfer MOH source control These options are set in Program 77-1 (LED 05 and 06) of the Strata DK40 Programming Manual. Only one option is allowed per installation. However, in the DK40, these options can be supplemented with PIOU/PIOUS relay options. Electrical specifications for the DK40...

  • Page 223: External Speaker Unit (hesb) Options

    Plug the provided power cord into the power supply and to a 240VAC, 50Hz power source. Important! If AC voltage is not within range, have a qualified electrician correct the problem. 6-19 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 224: Figure 6-11 Hesb/digital Telephone With Loud Speaker Amplification Wiring

    HHEU installation information Digital Telephone Chapter 5 – Station Apparatus. 1512 Figure 6-11 HESB/Digital Telephone with Loud Speaker Amplification Wiring 6-20 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 225

    HESB have been made properly (wires to terminals 1 and 2 of the HESB TB1 terminal block may have been reversed). 6-21 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 226: Figure 6-12 Hesb/electronic Telephone With Loud Speaker Amplification Wiring

    Card into base of EKT 6500-Series per instructions in Chapter 5 – Station Apparatus. Figure 6-12 HESB/Electronic Telephone with Loud Speaker Amplification Wiring 6-22 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 227: Amplified Speaker Option

    Make an external page. The page should be heard over the HESB. Adjust the HESB volume control to the desired level 6-23 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 228: Talkback Amplified Speaker Option

    The 600Ω Page RCA jack is a two-way (duplex) page output compatible with most commercially available talkback amplifiers–door phone not required for talkback. 6-24 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 229

    Verify that someone speaking into the door phone can be heard at the paging station. (With this application, pressing the door phone button is not required to talk back through the door phone.) 6-25 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 230: Figure 6-14 Hesb/talkback Amplified Speaker Wiring

    – MDFB not required. • PIOU/PIOUS/PEPU Page Outputs 240 VAC to 12 VDC do not operate. Figure 6-14 HESB/Talkback Amplified Speaker Wiring 6-26 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 231: Hesb Wall Mounting

    Connect the customer supplied Bell, Flashing Lamp or Electronic Alarm to the terminal strip inside the T001B relay unit, the positive lead pin 4 and the negative lead to pin 2. 6-27 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 232: External Page Options

    4.5~5V accross pins 1 & 6 of the HESC cable. External Page Options Strata DK40 systems offer a variety of external paging options, each of which includes a BGM option. Paging with BGM (same amplifier)

  • Page 233: Figure 6-16 T001b Installation/configuration

    4 DEVICE + (TB1 - Pins 1 & 2 internally linked) FEMALE SOCKET COIL COIL Figure 6-16 T001B Installation/Configuration 6-29 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 234: Figure 6-17 Page And Seperate Bgm Using The Same Amplifier

    25 - PAIR (17) AMPHENOL CONNECTOR Input 2 Music Source 1517 Figure 6-17 Page and Seperate BGM Using the Same Amplifier 6-30 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 235

    (-) to the (-) out of the page amplifier. Connect the PIOU PGOUT pins to the zone A~zone D speakers (A). 6-31 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 236: Figure 6-18 Piou Zone, Page/bgm/night Ring (seperate Amplifiers)

    Access Codes DK40 All Call Page and External All Call Page Figure 6-18 PIOU Zone, Page/BGM/Night Ring (Seperate Amplifiers) 6-32 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 237

    Connect zone 1 through zone 4 speakers “A” terminal to the PG OUT contact of the PIOU relays K1~ K4, respectively. 6-33 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 238: Figure 6-19 Zone Paging With Multiple Amplifiers

    NOTES: 1. See Programs 78-1, 77-1 for Night Ringing Exchange line and Tennant (1-2) zone assignment options. 2. Dial Intercom + #59 to pick-up Night Ringing Exchange lines. Figure 6-19 Zone Paging with Multiple Amplifiers 6-34 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 239: Night Ringing Over Selected Page Zones

    Night Mode. Program 39: Assign the appropriate 1LJKW 7UDQVIHU button to electronic and digital telephones. 6-35 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 240: Figure 6-20 Night Ringing Over All External Page Zones

    77-1: LED 08, ON to enable door phone ring over night page Enable exchange lines to night ring over external page Figure 6-20 Night Ringing Over All External Page Zones 6-36 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 241: Smdr Printer/call Accounting Device Options

    Caller ID calls. Call record data is printed out at the completion of each eligible call. SMDR format is ASCII-formatted, 8-bits, no parity, 1-stop bit. To support the SMDR printer/call accounting device option, a Strata DK40 system must be equipped with a PIOU or PIOUS...

  • Page 242: Smdr Printout Examples

    MSS will not print if the call is answered before the threshold time set in Program 60-2. Printout B: 003 MSS 04:32 00:00;48 00;05 13 13 04:33 00:00:15 6-38 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 243: Figure 6-21 Smdr Printout Example

    SMDR Printer/Call Accounting Device Options Peripheral Installation Figure 6-21 SMDR Printout Example 6-39 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 244: Figure 6-22 Smdr Printout Example Column/field Definitions

    The call record data is ASCII-formatted, 8 bits; no parity, 1-stop bit. Special dial printout: Tone = “T”, Long pause = “L”, Flash = “F”, Pause = “P” 6-40 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 245

    The “MSS” entry prints out only if the call was connected after the SMDR threshold, 1.0 or 10 seconds. The threshold is set in Program 60-2 (See DK40 Programming Manual). 6-41 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 246: Smdr Programming

    Use Program 60 to set the system for the required SMDR printer/call accounting device options (refer to the following section and the DK40 Strata Programming Manual). 6-42 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 247: Figure 6-23 Piou/pious Smdr Cable Connections

    See PIOU, PIOUS TTY and SMDR Wiring in Chapter 4 – DK40 Universal Slot PCB Wiring for more details. Figure 6-23 PIOU/PIOUS SMDR Cable Connections 6-43 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 248: System Database Printout Using Smdr Port

    To support voice mail, DK40 KSU must have K5RCU installed. Voice mail integration is provided by Strata in-band tones (DTMF integration). 6-44 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 249: Toshiba Stratagy Or Stratagy Dk Voice Messaging Systems

    Peripheral Installation Toshiba Stratagy or Stratagy DK Voice Messaging Systems Strata DK40 systems are designed to support the full range of features offered by the Toshiba Stratagy systems. It provides various call routing, message handling, and information management features, including:...

  • Page 250: Customer-supplied Voice Mail Messaging Systems

    Stratagy call. Disconnect (D) Tone The Strata DK40 stations send a disconnect tone to Stratagy when the station hangs up while connected to Stratagy. D Tone is also sent to release the Stratagy or Auto Attendant port when an outside exchange line caller hangs-up and the exchange provides a Calling Party Control (CPC) or Auto Release (AR) disconnect signal per Program 15 in the Strata DK40 Programming Manual].

  • Page 251: General Voice Mail (standard Telephone Port) Programming

    If the VM machine has the ability to dial a code and the appropriate station numbers to set or cancel the message waiting LEDs on digital and electronic telephones, you can use Program 10-2, LED 04 to instruct the VM machine to set or cancel a MW LED. See the Strata DK40 Programming Manual for more information.

  • Page 252

    Programs 16, 40, 41, 45~48 and 50~56: Verifies that outgoing Exchange line access is allowed on VM ports to allow the VM out dialling message notification feature to operate. 6-48 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 253: Voice Mail System Installation

    $ODUP 5HVHW button (see Program 39 in the Strata DK40 Programming Manual). 6-49 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 254: Auto Attendant

    Incoming calls are greeted by an external announcement device that offers callers a menu of station locations 6-50 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 255: Strata Dk40 Built-in Auto Attendant (aa)

    External Auto Attendant Strata DK40 Built-In Auto Attendant (AA) A built-in Auto Attendant feature is programmed into the Strata DK40 system software. To enable the built-in AA to function, a K5RCU DTMF tone receiver and KKYS/RKYS PCB must be installed.

  • Page 256: Figure 6-27 Built-in Auto Attendant Basic Call Sequences

    2 ring), incoming calls can be set to ring built-in AA announcement ports on a Delayed Ringing basis. Program *11 assigns DDI calls to ring the built-in AA. 6-52 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 257

    120 seconds: LED 16 = OFF. LED 17 = ON. 240 seconds: LED 16 = ON. LED 17 = OFF. 6-53 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 258

    “Built-in Auto Attendant Programming” on Page 6-52. Record the message and dialling prompts on the announcement device per the device manufacturer's instructions. 6-54 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 259: Figure 6-28 Announcement Device Block Diagram

    Both options can be used simultaneously or independently. See Chapter 7 – DK40 ACD Installation for ACD/Auto Attendant programming options 6-55 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 260

    100 milliseconds open circuit on the (KSTU3/RSTU/PSTU) loop and hang-up when it detects the open on the loop. 6-56 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 261

    Program 09 Go to on next page Go to on next page 1544 Flowchart 6-2 Built-in Auto Attendant Flowchart 6-57 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 262

    4 Seconds After Announcement Disconnects) A2 ~ A2''' — Secondary Announcement Device(s) 1545 Go to Figure 6-2 Built-in Auto Attendant Flowchart (continued 6-58 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 263: Non-built-in Auto Attendant

    Multiple PIOU, PIOUS Installation Peripheral Installation Non-built-in Auto Attendant Alternatives to using the Strata DK40 built-in AA feature, are voice mail systems, such as Toshiba Stratagy or Stratagy DK, with an AA feature and non-voice mail AA as a stand-alone device.

  • Page 264: Figure 6-29 Multiple Piou/pious (remote Maintenance, Mis For Acd)

    PIOU or PIOUS will be active on the installed PIOU/PIOUS that is programmed with the lowest Program 03 code (41 or 42). Figure 6-29 Multiple PIOU/PIOUS (Remote Maintenance, MIS for ACD) 6-60 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 265: Figure 7-1 Acd Call Handling Example

    Figure 7-1 shows an example of how a typical ACD call is handled. The Strata DK40 System provides many ACD functions and custom keys on for Toshiba DKT2000-series telephones. For instance, the ACD Supervisor can monitor calls and assist Agents through use of an LCD telephone, programmed especially for the Supervisor which shows ACD Agent and Group information.

  • Page 266: Installation

    Announcements/music patterns are played and sent to callers at programmed time intervals while calls are waiting in an ACD queue. Announcement and music devices are connected to Strata DK40 station ports and are assigned to ACD Groups in Program 14-3 in the Strata DK40 Programming Manual.

  • Page 267: Figure 7-2 Smis/acd Wiring Diagram

    Music source to DK40 MOH input: The MOH source connected to the CTU MOH jack can be sent to ACD Groups selectively via Program 14-3. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 268: Acd Installation Guidelines

    SMIS registers ACD calls: An ACD call is a call that is sent (directly or transferred) to the ACD group. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 269

    Step 8: Install ACD to Strata DK40 Built-in Auto Attendant (AA) Integration If ACD calls route to an ACD Group via the Strata DK40 built-in AA, install and program the AA per “Strata DK40 Built-In Auto Attendant (AA)” on Page 6-51 Chapter 6 –...

  • Page 270: Acd Line Operation/programming Considerations

    ACD Groups when they ring or dial into the Strata DK40 system. All line types can be programmed to transfer into an ACD Group from any telephone or built-in or external AA.

  • Page 271: Transfer From Built-in Auto Attendant (aa) To Acd Group

    (Agent telephone or overflow destination) to become idle receives the call. In this case, DDI and tie lines operate the same as loop start lines. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 272: Acd Group Status

    When an ACD Group is placed in the After Shift mode, calls are not sent to the ACD Group’s queue or Agents, but are routed to the After Shift destination set in Program 14-6. The After Shift operation for each possible case is described below (also see Strata DK40 Programming Manual, Flowchart 6-5): If the After Shift destination is idle, all line types ring the idle destination.

  • Page 273: Agent Ring No Answer Call Treatment

    If the RNA destination is another ACD Group (not the same one), the call will ring an available Agent. If all Agents are busy the call will join the queue for the ACD Group. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 274: Acd Smdr Printout Examples

    Agent Talk Time Duration Call Disconnect Time Agent Telephone [PDN] DDI Line Number 2023 Figure 7-3 DDI Call to ACD Queue Example 7-10 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 275: Figure 7-4 Loop Start Incoming Call Example

    Time call is disconnected Talking Telephone [PDN] DDI Line Number 1999 Figure 7-5 DDI ACD Call to Available Example 7-11 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 276: Figure 7-6 Incoming Built_in Aa Disa Call (non-acd Call) Example

    [DN] 204 Answers Line 003 (Agent logged in and ready on 204) C→ [DN] 204 Hangs up 2081 Figure 7-7 Transfer Exchange Line to ACD Group Example 7-12 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 277: Figure 7-8 Direct Loop Start Line Call To Acd Agent (no Queue Time)

    Agent Talk Time Duration Call Disconnect Time Exchange Line Number 1998 Figure 7-9 Delay Ring to Built-in AA Example 7-13 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 278: Insight Dk

    Wall Boards. The software works on a PC running Microsoft Windows Strata DK40 Requirements The RKYS3 must be installed on the Strata DK40 K5RCU PCB in order for the Insight DK to work. Reference Information Refer to the Insight DK Installation & Programming Guide for software installation and operation instructions.

  • Page 279: Figure 7-11 Twisted Pair Connections

    Data In Data Out Twisted Pair Cable Data Out Data In Pair 2 2547 Figure 7-11 Twisted Pair Connections 7-15 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 280

    DK40 ACD Installation Insight DK 7-16 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 281: About Strata Dk And Tapi

    "DDE", (Dynamic Data Exchange). StrataLink is further explained in Section 3 called "Using StrataLink for CTI Connections". Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 282: Requirements

    Highlight the Toshiba DKT TSPI. Click Remove. A confirmation box asks if you want to remove the driver. Click Yes. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 283: Figure 8-2 Control Panel

    StrataLink & TAPI Service Provider for Windows 95 & NT Computer Telephony Integration Figure 8-2 Control Panel Figure 8-3 Selecting the Toshiba Driver Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 284: Install Tspi And/or Stratalink Packages

    When the Automatic Start-up menu appears, make sure that "Add StrataLink to the Start-up Group" is checked. Follow the remaining Installation Wizard instructions to complete the installation. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 285: Figure 8-6 Including Stratalink In Startup Group

    The light above this box will be red at first, then yellow as the TAPI Service Provider is initialised and finally green when initialisation is complete.Press Driver Set-up to configure the TAPI Service Provider. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 286: Figure 8-8 Configuring The Toshiba Driver

    Select a button. Choose a function from the list. 2696 Figure 8-9 Configuring the driver to match the keyset programming Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 287

    1b. To change the Startup up to automatic press the Startup button. 1c. Choose Automatic for the Startup types. 1d. Press OK. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 288: Purpose

    This interface provides three levels of service: Basic, Supplementary and extended Levels of Service. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 289: Levels Of Service

    Phone Device Model At present, the DKT TSPI does not support the phone device model. Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 290: The Dkt Tspi Call State Flow

    Computer Telephony Integration The DKT TSPI Call State Flow The DKT TSPI Call State Flow The Call State Flow diagram for the Toshiba TAPI Service Provider V2.36 or above is shown Figure 8-11 below. Figure 8-11 Call State Flow Call State LED...

  • Page 291: System Messages

    Two pieces of information are returned to the application: an application handle and the number of available line devices. Strata DK TSPI supports multiple line devices. 8-11 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 292: Receiving Information

    Returns the supplementary and extended capabilities of a given line device as a data structure of type lineDevCaps: 8-12 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 293

    Not supported by Toshiba DKT TSPI dwGatherDigitsMaxTimeout dwMedCtlDigitMaxListSize dwMedCtlMediaMaxList Not supported by Toshiba DKT TSPI dwMedCtlToneMaxListSize dwMedCtlCallStateMaxListSize dwDevCapFlags dwMaxNumActiveCalls dwAnswerMode LINEANSWERSTATE_DROP dwRingModes 8-13 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 294

    A NULL-terminated string reflecting the name of the key on the station. This is defined during Set-up of the driver dwDevSpecificOffset dwDEVSpecificSize Not supported by Toshiba DKT TSPI dwDevSpecificOffset 8-14 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 295

    LINECALLSTATE_ONHOLD | LINECALLSTATE_CONFERENCED | LINECALLSTATE_ONHOLDPENDCONF | LINECALLSTATE_ONHOLDPENDTRANSFER | LINECALLSTATE_UNKNOWN dwDialToneModes LINEDIALTONEMODE_UNAVAIL dwBusyModes LINEBUSYMODES_UNAVAIL dwSpecialInfo LINESPECIALINFO_UNAVAIL dwDisconnectModes LINEDISCONNECTMODE_UNKNOWN dwMaxNumActiveCalls dwMaxNumOnHoldCalls 8-15 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 296

    LINETRANSFERMODE_TRANSFER | dwTransferModes LINETRANSFERMODE_CONFERENCE dwParkModes LINEPARKMODE_NONDIRECTED LINEFORWARDMODE_UNCOND | dwForwardModes LINEFORWARDMODE_BUSY | LINEFORWARDMODE_NOANSW | LINEFORWARDMODE_BUSYNA | dwMaxForwardEntries dwMaxSpecificEntries dwMinFwdNumRings dwMaxFwdNumRings 8-16 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 297

    Retains the value passed in lineSetAppSpecific. dwCallID Not supported by Toshiba DKT TSPI dwRelatedCallID Not supported by Toshiba DKT TSPI 8-17 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 298

    Not supported by Toshiba DKT TSPI dwRedirectingIDSize Not supported by Toshiba DKT TSPI dwRedirectingIDOffset dwAppNameSize dwAppNameOffset dwDisplayableAddressSize Not supported by Toshiba DKT TSPI dwDisplayableAddressOffset 8-18 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 299

    This function returns a device ID for the specified device class associated with the selected line, address or call. Toshiba DKT TSPI uses this function to identify the real device ID when the line device was opened using LINE_MAPPER as a device ID. This function call can also be used to obtain the device ID of the phone or media (e.g.

  • Page 300

    The address can be specified either as dwAddressID, as a phone number, or as a device specific name or identifier. 8-20 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 301: Basic Call Control

    LINEADDRESSMODE_ADDRESSID dwAddressID anyavailable DialParams 0,0,0,0 dwOrigAddressSize dwOrigAddressOffset dwDisplayableAddressSize dwDisplayableAddressOffset dwCalledPartySize dwCalledPartyOffset dwCommentSize dwCommentOffset dwUserUserInfoSize dwUserUserInfoOffset dwHighLevelCompSize dwHighLevelCompOffset 8-21 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 302: Holding Calls

    This function retrieves the specified held call. This feature is only valid when the call is in the LINECALLSTATE_ONHOLD state. 8-22 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 303: Transferring Calls

    This conference call is then placed on conference hold. 8-23 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 304: Call Parking

    Set or cancel call forwarding requests. Call Pickup linePickup Pick up a call that is alerting at another station. 8-24 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 305: Miscellaneous Functions

    LineMonitorMedia lineGatherDigits LineMonitorTone lineGenerateTone LineGenerateDigits lineRedirect LineAccept lineUncompleteCall LineCompleteCall lineDevSpecific LineDevSepcificFeature LINE_MONITORMEDIA LineSetTerminal LINE_MONITORTONE LINE_MONITORDIGITS LINE_DEVSPECIFIC LINE_CALLDEVSPECIFIC LINE_DEVSPECIFICFEATURE LINE_CALLDEVSPECIFICFEATURE 8-25 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 306: Extended Services

    DKT 2000 phone within the PC Application Program along with their TAPI interface. The Toshiba Service Provider will send a message each time an update occurs in the LED or LCD display that looks like a snapshot of the phone which can be used to provide the identical display in the PC as seen on the phone.

  • Page 307

    //Upper line of the display char szUpperLine[DISPLAY+1]; //Lower line of the display char szLowerLine[DISPLAY+1]; }DKTSNAPSHOT, *PDKTSNAPSHOT; #pragma pack (0) 8-27 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 308

    Flex Key 15 Hold Flex Key 16 Mode Flex Key 17 Page Flex Key 18 Flex Key 19 Flex Key 20 8-28 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 309

    Figure 8-12 shows how StrataLink is used with Windows applications to provide telephone services with your desktop PC. 8-29 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 310: Stratalink Functions

    TAPI link, to view the details of the information being passed. Without these tools, the troubleshooting or verifying operation is reduced to guessing. 8-30 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 311: Software Application Initiated Events

    StrataLink, wherever necessary, offers more than one format for each command. (See your program's Application Notes for applicable commands.) The following are some examples: 8-31 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 312: Figure 8-13 Dialling Preference Screen

    [Answer, <appearance>] ..or [Answer Call ()] Hang-up Hang-up on an active call. [Hang-up] ..or [DropCall ()] 8-32 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 313: Telephone System Events

    When adding or changing a rule, the following fields are displayed on the Add/ Change Trigger Rule Screen (Figure 8-15): Figure 8-15 Add/Change Trigger Rule Screen 8-33 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 314: Figure 8-16 Add/change Actions Screen

    Deleting or adding Actions without instruction from Toshiba is not recommended. Editing Actions should always be in accordance with the program's Application Notes. Figure 8-16 Add/Change Actions Screen 8-34 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 315: Figure 8-17 Add/edit Actions Screen

    DDE Execute String - This is the command to be executed by the application receiving this DDE event. Typically this command includes token(s) so that real-time information is included in the command string. 8-35 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 316: Tokens

    TAPI Appearance Name &B Hyphanated: 714-555-1234 &I Caller Phone Number TAPI Call ID &G Hyphanated: (714)-555-1234 &T Time of Day: HH:MM 8-36 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 317

    Trigger Rule to send a Call Cleared message whenever a Call Clears. Action Type DDE Executive App Name DTO_AxxConnect App Topic SYSTEM DDE Executive String [CallCleared (“&G”, “&P”, “&N”, “2”)] 8-37 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 318: Telemagic Link

    The TeleMagic Link must be operational before you can make this selection. 8-38 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 319: Figure 8-19 Tapi Test Screen

    Pickup, Dial and Hang-up keys individually. To complete the test, you should repeat this procedure for each line appearance. To access the set-up screen for the Toshiba TAPI Service Provider, click on the Driver Set-up button. The Configure Keys section of the screen should be programmed properly as they will be interrogated and used as the Appearances by StrataLink.

  • Page 320: Debugging

    This window can be kept open while other activities and functions are performed. Figure 8-21 Debug Events Screen 8-40 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 321: Figure 8-22 Overview Of How Stratalink Works Goldmine '95

    Service Link RPCI to COM Port Provider (Windows) Link 2076 Figure 8-22 Overview of how StrataLink works Goldmine ‘95 8-41 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 322: Goldmine '95 Installation Guidelines

    Goldmine '95 Installation Guidelines Getting Started Install the Toshiba TAPI Service Provider by inserting Disk #1 in the floppy drive and use Windows, Run ... and enter A:\SETUP. Follow the instructions provided by the Install Wizard. (See Section 1 of this document.) Install Goldmine '95 by following the installation instructions in the Goldmine '95 User Guide.

  • Page 323: Figure 8-23 Pop Action For Goldmine

    "pop the next record" occurs if the current call is terminated or placed on hold. Note A time delay can be used, if needed, for your application and for selected line buttons. 8-43 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 324: Figure 8-24 Trigger Rules For Goldmine

    This is a very powerful tool for users handling numerous calls. 8-44 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 325: Figure 8-26 Call Connected Trigger

    Goldmine '95 Installation Guidelines Computer Telephony Integration Figure 8-26 Call Connected Trigger 8-45 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 326: Beneficial Options Available In Goldmine 95

    Opt2=Answer,STRATLNK,[AnswerCall()]Answer the ringing line Opt3=ACD Calls,STRATLNK,[Answer,4]Answer only the specified line. In this case, the calls on the ACD Button. 8-46 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 327: Figure 8-27 Goldmine Toolbar

    8-47 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 328: Linking Act! 3.0 With Stratalink

    This can be a problem if calls are transferred to the CTI enabled phone. 8-48 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 329: Installing Act! 3.0

    Select the Dialler tab. Then check Use dialler. Under Dialler settings, select Toshiba DKT TSPI as the modem. Choose a Location. 8-49 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 330: Figure 8-29 Act! Preference Screen

    (button) selection. Figure 8-29 ACT! Preference Screen 8-50 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 331: Figure 8-30 Act! Trigger Rules

    CTI-enabled location. The action "Lookup Everyone" should not cause a problem. 8-51 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 332: Figure 8-31 Stratalink Action For "popping" Act!

    The following Actions have been predefined to work with ACT! 3.0 to control the screen to match the Caller ID received. Toshiba does not expect the user to understand the details of the interface between ACT! and StrataLink. These actions are provided to ensure that information is entered correctly in a given system when problems might occur.

  • Page 333: Handling Outgoing Calls

    For OpenForm use the filter parameter to make the form go to the first record with the correct phone number. [OpenForm "Form Name",,,"[Contact.PhoneNumber]=&P"] 8-53 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 334

    If responding to a ringing DDE event, ensure DDE communication back to StrataLink is performed last (after opening any filtered forms etc.). 8-54 Strata DK40 I&M Manual Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 335

    +country code (area code) rest of number The phone number for Toshiba Information Systems (UK) Ltd is 01932 841600. The country code for the UK is 44. The Toshiba Information Systems (UK) Ltd phone number in the above format is;...

  • Page 336: Handling Incoming Calls

    Configuring Outlook To set up outgoing dialling choose "Dial Options" from the "General Tab" of the "Options" item in the "Tools" Menu. Select "Toshiba DK TSPI " from the drop down list as shown below.. Figure 8-33 Toshiba DK TSPI of Dial Options Menu Confirm the dialling properties are correct from the "Dialing Properties"...

  • Page 337: Fault Classification

    Fault Finding This chapter describes the procedures to diagnose faults in the Strata DK40 Key Service Unit (KSU). Faults are classified and then cleared by replacing the malfunctioning unit and by performing operational tests in the sequences by prescribed by the fault clearing flowcharts in “Fault Isolation Flowcharts”...

  • Page 338

    If the fault is not cleared by substituting a PCB, reinstall the original PCB in the KSU/cabinet before trying another PCB. Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 339: Defective Parts Return

    Enter the customer database (manually or with DK Admin) and retest for faults. After performing the above steps, tag the defective PCB(s), Power Supply, or KSU, and return for repair. Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 340: Power Supply Test

    The green-red, black-yellow and white-blue measurements should be within 10% of each other. Nominal voltage—within limits of ±26.3 ~ ±27.8 VDC while under AC power, polarity depending on voltmeter lead placements. Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 341: Ohmmeter Test

    HDSSs. An improper reading indicates an open, crossed or shorted wire. See “Power Supply Replacement” on Page 2-21 Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 342: Cable Installation Test

    HDSS console to circuits 7 and 8 of a PEKU, then the maximum cable restriction is 20 ohms, not 40 ohms. Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 343: Table 9-4 Station Cable Continuity Check For Electronic Telephone Cables Using Ohmmeter

    HDSS console to circuits 7 and 8 of a PEKU, then the maximum cable restriction is 20 ohms, not 40 ohms. Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 344: Fault Isolation Flowcharts

    Flowchart operational? Is it a Go to voice mail/auto Flowchart attd fault? Go to Is it Flowchart an SMDR fault? Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 345: Fault Finding

    Was the fault cleared after re-initialising the system? Does the fault re-occur after entering customer database? Call your technical support group. 1880 Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 346

    Initialise the DK40 system cleared? (Prog: 91-9 and 03). Retest. Is the Call your technical fault support group. cleared? 1881 Go to 9-10 Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 347

    (Prog. 91-9 and 03). Retest. Is the Call your technical fault support group. cleared? Go to 1882 9-11 Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 348

    Test DSS cable with cable continuity checks in this chapter. Correct as necessary. Is the fault cleared? Call your technical support group. 1883 9-12 Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 349

    • 35 – Busy station transfer/ringing • 36 – Fixed call forward • 37 – Ring transfer recall time Call your technical support group. 1884 9-13 Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 350

    Chapter 4.) Change the PIOU/ PIOUS PCB. Fix as required. Is the fault cleared? Call your technical support group. 1885 9-14 Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 351

    PIOU or PIOUS. TTY port to the terminal or external modem must be 6-wires. Call your technical support group. 1886 9-15 Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 352

    Fault Finding Fault Isolation Flowcharts 9-16 Strata DK40 I&M Spring 1999 Refer to the Strata DK40 Programming Manual or DK Library CD-Rom for more details.

  • Page 353

    6-15 KKYS, 2-25 DDCB/HDCB, 5-25 KSTU3, 2-27 cabling, 5-25 RKYS, 2-26 programming, 5-28 TBSU, 2-35 wall mounting, 5-26 TCOU, 2-32 DDSS, 5-23 battery backup, 2-17 connections, 5-23 beep strap, 5-14, 5-22 IN-i Strata DK40 I & M Manual Spring 1999...

  • Page 354

    DKT2000 ADM installation, 5-16 PEPU, 3-9 door lock control, 6-10 PIOU/PIOUS, 3-11 DDCB, 6-15 RBSU/RBSS, 3-44 relay options, 6-10 RPTU, 3-29 door lock control unit, 5-25 RSTU/PSTU, 3-25 door phone (see MDFB), 5-25 IN-ii Strata DK40 I & M Manual Spring 1999...

  • Page 355

    & interface connectors, 2-30 talkback amplified speaker, 6-24 illustration, 2-29 installation, 6-25 installation procedure, 2-27 test, 6-25 KSTS3 illustration, 2-29 wall mounting, 6-27 programming, 2-28 HHEU, 5-11, 5-20 wiring, 2-28 installation, 5-12, 5-20 IN-iii Strata DK40 I & M Manual Spring 1999...

  • Page 356

    4-4 hardware options, 3-4 illustration, 3-5 PACU, 3-19 installation, 3-4 controls, indicators & connectors, 3-21 programming, 3-4 illustration, 3-21 wiring diagram (DDCB), 4-3 installation, 3-19 wiring diagram (DDSS), 4-2 IN-iv Strata DK40 I & M Manual Spring 1999...

  • Page 357

    3-55 power failure terminal screws, 2-41 premise wiring guidelines, 3-55, 3-56 power supply programming, 3-46 removal, 2-20 PS-1 backup power option, 3-45 replacement, 2-21 R40S installation procedure, 3-51 IN-v Strata DK40 I & M Manual Spring 1999...

  • Page 358

    2-43 installation procedure, 6-42 connecting to station devices (NT- options, 6-37 mode), 2-45, 2-46 printout example, 6-38 controls, indicators & connectors, 2-39 column/field definitions, 6-40 EMC ferrite core requirement, 2-42 IN-vi Strata DK40 I & M Manual Spring 1999...

  • Page 359

    MDF, 4-9 PIOU/PIOUS, 3-11 standard telephone/VM/DPFT, 4-9 RBSU/RBSS, 3-44 TCOU, 2-56 RPTU, 3-29 Worksheets RSTU/PSTU, 3-25 DK40 System PCB Assignment, 1-11 Stratagy DK, 1-4 voice mail customer-supplied, 6-46 IN-vii Strata DK40 I & M Manual Spring 1999...

  • Page 360

    Index IN-viii Strata DK40 I & M Manual Spring 1999...

Comments to this Manuals

Symbols: 0
Latest comments: