Program *09 Ddi Digit Translation (Groups 000~069); Program *09 Overview - Toshiba Strata DK40 Programming Manual

Program *09 DDI Digit Translation (Groups 000~069)

Program *09
DDI Digit Translation (Groups 000~069)
Program Type:
Initialised Default:
(QWHU 3URJ 0RGH 0 6SNU
SELECT = Group No.
To add a group range, enter XXX
high group). (Do not press
range.) Then enter the lowest DDI Ext. number as the
first Ext. number in the range.

Program *09 Overview

This program assigns DDI telephone numbers to ring specific groups. A group may be made
up of one or more stations. A station may belong to more than one group. The DK40 will
support the group range 000-069. For each group, on the Program *09 System Record Sheet,
record the DDI telephone number that should be dialled to ring that group with DDI calls.
Each DDI telephone number can only ring one group. The DDI number can be 3 or 4 digits
long. After the DDI telephone number is dialled by the caller, the call will be routed to the
group number assigned with the DDI telephone number in this program. To assign the
stations that are to ring with incoming DDI calls, (and are the member(s) of the groups),
Programs 71
Alpha-tags to the groups use
Notes
1. Press Key 01 to enter Blank/erase DDI extension numbers.
2. The DIAL=DATA must not be the same as any CPN data entered in Program *11.
Strata DK40 Programming Manual Spring 1999
Station
Initialised Data is Blank
3 < +ROG 0 6SNU
*
* XXX (low group *
#
after entering a group
- 75. For ACD group ringing refer to
Program
& +ROG
Chapter 6 ACD
76-1.
System & Station
0 6SNU & & +ROG 0 6SNU &
DIAL = DDI Extension Number (1~4 digits)
Press LED Button 01 to erase extension
numbers.
Programming. To allocate
& +ROG
see
3-13