Program 55-1 And 2 Overview - Toshiba Strata DK40 Programming Manual

Program 55-1 and 2 Add Digits Before and/or After the Dialled Number
Table
No. 1 2 3
01
02
03
04
05
06

Program 55-1 and 2 Overview

Enter the digits/functions that must be added to the front of the number dialled in the Add
Digits Table. The maximum quantity of functions that can be entered is 22, a function can be
any one of the following:
By entering the digit from the keypad;
A digit to be sent to line.
Or by pressing a specific LED (See System Record sheets for the specific key presses);
A pause to be sent to line, (the system offers a selection of pre-determined pause lengths)
(LED's 01 - 08).
One of 8 authorisation codes to be sent to line (LED's 12, 14 ~ 20).
The station number of the extension making the call to be sent to line (LED 13).
A conversion either at the beginning or during the string from DP to DTMF (LED 10).
Sub-Address Information to be sent to line (LED 09).
Note
The Authorisation Codes are entered from port 000, normally station 10
for method of entry).
Strata DK40 Programming Manual Spring 1999
Add to END of Dialled Number (Program 55-2)
4 5 6 7 8
If a pause requires entering try to allow for the longest wait e.g. make the pause
longer rather than shorter, to accommodate the length of time a carrier may need to
access the service tones, etc.
9 10 11 12 13
Least Cost Routing
14 15 16 17 18
(see Program 05-6
19 20 21 22
5-27