Toshiba Strata DK40 Programming Manual page 57

Program 00 Software Check
Action (press buttons + LED Buttons)
(QWHU >3DVVZRUG@ +ROG
3.
Enter the four digit password.
6SNU +6SHDNHU, 33 +ROG
4.
Speaker beeps to indicate when to enter program
number. Access Program 00.
6SNU +6SHDNHU,
5.
Prepare system for a selection.
1
N-N is the Program Telephone [DN].
Action (press buttons + LED Buttons)
6. Select one of the following attributes:
3
View the software version. This attribute can not be
edited.
or...
41111
Define the Level 1 remote maintenance security code
from the System Record Sheet (four digits maximum).
Level 1 allows remote access to all programs and data.
Default Level 1 security code is "0000."
or...
51111
Define the Level 2 remote maintenance security code
from the System Record Sheet (four digits maximum).
Level 2 allows remote access to programs 30~39 and
77~89 only. Default Level 2 security code is "0000."
or...
6
Sets the system for UK & Ireland operation - A law.
This parameter must not be changed.
;
View the software RAM Checksum. This attribute can
not be edited. The default checksum may change.
or...
Strata DK40 Programming Manual Spring 1999
LCD Response
level 1 Program Access
Program = 00
Data Store
00 Select =
LCD Response
00 Select = 0
TMEXNN-Key X
Note NN = The actual version number
and letter. See Program 00
record sheet for details).
X = 1, 2, or 3.
00 Select = 1
Password = 0000
00 Select = 2
Password = 0000
00 Select = 8
Data = XXXXXXXXX
00 Select = 8
Sum = XXXXXXXXX
Initialisation & Test
2-15