Program 39 Overview - Toshiba Strata DK40 Programming Manual

System & Station

Program 39 Overview

Program 39 assigns features to the flexible buttons for individual telephones in the system.
Several different types of buttons can be assigned through this program, including:
Feature Buttons Assignments
You can assign commonly used telephone features to any of the flexible buttons. Button
assignments can be different for individual telephones.
Sheet
also be made by the telephone user if that user's Class of Service and/or other programming
permits the feature.
To assign features to flexible buttons
1.
2.
3.
4.
5.
6.
Important!
3-90
Feature Buttons
Directory Number Buttons: [PDN]
for a list of features that can be assigned to telephones. Feature button assignments can
Complete Program 38 before Program 39. Initialised data assigns the keystrip
pattern associated with Code 31 from Program 38.
You can use the Flexible Button Assignments forms
Button Assignments" on Page
placed. Use the programming sequence at the top of that page to perform the
following steps.
Program the port number or enter a range of port numbers.
Press the button which will be associated with that feature.
Enter the feature code.
Repeat this procedure until all feature buttons have been assigned.
Running Program 38 after Program 39 will erase all option codes selected in
Program 39.
If DKT2001-F handsets are connected ensure KEY 00 = 00 ([PDN]/INT) and
KEYS 01 ~ 09 = *10 ~ *19 respectively.
Program 39 Flexible Button Assignments
See the Program 39 System Record
3-86) to indicate where feature buttons will be
Strata DK40 Programming Manual Spring 1999
(see "Program 39 Flexible