Program 40 Station Exchange Line Access - Toshiba Strata DK40 Programming Manual

Program 40 Station Exchange Line Access

Program 40
Station Exchange Line Access
Program Type:
Initialised Default:
(QWHU 3URJ 0RGH 0 6SNU
SELECT = Station Logical Port Numbers
To add a port range, enter XXX
To turn all Exchange LED's ON or OFF, after the port number and & is entered, press 9RO
To check a particular Exchange line, after the port number is entered, press 0RGH and enter the Exchange line number, then use the
& button to display and advance.
Processor
DK40
0 0
Exchange 0 0
Line LED 0 1
012 12
011 11
010 10
009 09
008 08
007 07
006 06
005 05
004 04
003 03
002 02
001 01
Strata DK40 Programming Manual Spring 1999
Toll Restriction
All LED's ON for all Exchange lines (all stations can access all lines)
7 3 +ROG 0 6SNU
* XXX (low port * high port).
Exchange Line
Range
001~012
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
2 3 4 5 6 7 8 9
& +ROG 0
[PDN] Port Tie Line Station
Range Port Range
000~027 028~039
Port
0 0 0 0 0 0 0 0
1 1 1 1 1 1 1 1
0 1 2 3 4 5 6 7
System & Station
6SNU & & +ROG 0 6SNU
LED Buttons = Exchange Lines
Light LED's for the port(s) that are allowed access.
(all LED's ON) or 9RO
DISA Port
049
0 0 0 0 0 0 0
1 1 2 2 2 2 2
8 9 0 1 2 3 4
& & +ROG
(all LED's OFF).
0 0 0 0
2 2 2 4
5 6 7 9
3-91