Program 54 Overview - Toshiba Strata DK40 Programming Manual

Program 54 LCR Route Definition Tables

Program 54 Overview

The purpose of this program is to define the four different ways of routing calls for each of
the LCR Route plans
Route Plan Number-This is the plan number already established in program 51 and
continued with in program 53.
Route Definition Number-This is the number of the Route Definition already specified in
program 53.
Trunk Line Group Number(01 ~ 08)- Refer to the LCR Line Programming Reference Table
completed at the beginning of the LCR record sheets.
Modified Digits Table (01 ~ 06)-Defines the modified digits table to be assigned to this
route. This allows the system to be pre-programmed with the relevant access codes for the
different carriers available.
groups differently, according to which modified digits table is selected.
Strata DK40 Programming Manual Spring 1999
(see Program
Each line group represents a type of service, e.g., Exchange, ISDN30, ISDN2(TE),
TIE etc.
Program 16 assigns lines to groups 1 ~ 08.
Program 40 denies incoming and outgoing line access to stations, including LCR
access.
Program 41 prevents line access from stations users overriding LCR by pressing the
line/pooled line key for access as opposed to dialling '9'.
Refer to Programs 55-0, 55-1
53). Define each route by selecting and entering:
Least Cost Routing
and 55-2. The system handles line
5-23