Program 46-6 ~ 8 Overview - Toshiba Strata DK40 Programming Manual

Program 46-6~8 Toll Restriction Allowed/Denied Local Codes Assigned by Class

Program 46-6 ~ 8 Overview

This program is as per
each Toll Restriction Class. Local code tables for classes 1 ~ 4 describe Local codes allowed
or denied for the class. Again as many as four Toll Restriction classes can be defined for
DK40 systems.
In each class the codes in stored in memory can be viewed , these can be displayed by using
the 8 # command. Any code/s that is/are displayed are classed as allowed codes. Anything
not displayed using the 8 # command is classed as denied. Initialised data can be seen at the
bottom of the System Record sheet.
For each class, choose whether the record table is used to record allowed Local codes in
memory (ALLOWED) or denied Local codes not in memory (DENIED). To enter the local
codes the data programmed must include all three digits i.e. for 100 (operator calls) 100
needs to be entered.
Important! Always be sure to provide access to emergency numbers such as 999 & 112.
Strata DK40 Programming Manual Spring 1999
Program 46-2~4 but defines the Local codes allowed or denied for
Toll Restriction
4-21