Programs 46-11~41 Toll Restriction Class (1~4) Parameters - Toshiba Strata DK40 Programming Manual

Programs 46-11~41 Toll Restriction Class (1~4) Parameters

Programs 46-11~41
Toll Restriction Class (1~4) Parameters
Program Type:
Initialised Default:
(QWHU 3URJ 0RGH 0 6SNU
Select Class from Legend below.
LED X
20~09
08
07
06
05
04
03
02
01
Programs 46-11 ~ 41 Overview
This program allows the Exception tables to be defined for each Class. To enter the codes into
the Exception Tables
There are up to 8 Toll Restriction Exception tables available on the system. Each table may
hold one number of up to 7 digits long. More than one Exception table may be assigned for
each class.
Exception tables to Class 2;
Programs 46-11 ~ 41. These programs should be run for the Exception table assignments for
each class of Toll Restriction.
Note
Strata DK40 Programming Manual Spring 1999
Toll Restriction
Leaves all LED's OFF
7 9 +ROG 0 6SNU
Processor
DK40
LED ON
Not Used
Table 08 INT/STD/Local Exception
Table 07 INT/STD/Local Exception
Table 06 INT/STD/Local Exception
Table 05 INT/STD/Local Exception
Table 04 INT/STD/Local Exception
Table 03 INT/STD/Local Exception
Table 02 INT/STD/Local Exception
Table 01 INT/STD/Local Exception
see Program
Program 46-11 assigns Exception tables to Class 1;
Program 46-31
LEDs 01 ~ 08: Exception Tables 1 ~ 08-Select the exception tables that apply to the
class being defined by marking an X in the box.
Each class can be assigned any or all of the available Exception tables.
4 +ROG 0
Toll Restriction Class
1~4
47.
assigns Exception tables to Class 3; etc.
6SNU & & +ROG 0 6SNU
Light LED Buttons as required to assign Table to Class.
Exception Tables
8
LED OFF
Not Selected
Not Selected
Not Selected
Not Selected
Not Selected
Not Selected
Not Selected
Not Selected
Program 46-21
Toll Restriction
& & +ROG
assigns
4-15