Program 02 Station Physical Port Display And/Or Change; Program 02 Overview - Toshiba Strata DK40 Programming Manual

System & Station
Program 02
Station Physical Port Display and/or Change
Program Type:
Initialised Default:
To Save existing Physical Port
(QWHU 3URJ 0RGH 0 6SNU
SELECT = Logical Port Number
The physical port number associated with the logical
telephone port displays after the logical port number
is entered.

Program 02 Overview

Program 02 enables you to enter a logical port to display the associated physical port. You
then have the option to assign a new physical port to the logical port. (To return ports to their
initialised settings, see
Notes
Record port locations on Program 04 record sheet.
The system allows only like ports to be reassigned (see below).
Digital-to-Digital Ports (PDKU-PDKU Ports)
Electronic-to-Electronic Ports (PEKU-PEKU Ports)
Standard Tel to Standard Tel Ports (KSTU-PSTU-
RSTU)
3-2
Station
Logical port number = physical port number
Program 90, 91-1, or 91-9 initialises Program 02
3 5 +ROG 0 6SNU
Processor
DK40
Programs 90
Allowed

Program 02 Station Physical Port Display and/or Change

6SNU
[PDN] Port Range
000~027
and 91.)
DSS, BGM or Amplified Conference Ports
should not be reassigned
Door Phone Ports should not be reassigned
Tie line Ports – should not be reassigned
PDKU to PEKU – cannot be exchanged
PSTU to PDKU – cannot be exchanged
PEKU to PSTU – cannot be exchanged
Strata DK40 Programming Manual Spring 1999
+ROG 0 6SNU & & +ROG
Enter new Physical Port
to change existing Physical Port
Not Allowed
0 6SNU & & +ROG