Program 49 Overview - Toshiba Strata DK40 Programming Manual

Toll Restriction

Program 49 Overview

This program assigns the Toll Restriction Class to each station port defined in the system
during Night Service. This level of restriction is initiated by pressing the Night Transfer (NT)
button. The system can be programmed with up to 4 tenant groups which each have their own
Night Transfer (NT) button. When programming the night level of toll restriction this needs
to be taken into account as the stations belonging to the different tenant groups might want to
have Night Service initiated at different times of the day.
For a different level of Toll Restriction to be assigned during Night Service LED 3 must be
set to ON in Program 10-5.
Note
Tenant Group Number Member
Enter the Tenant Group number that the station is a member of.
Digit Restrict Code
This selection is not currently available in the UK.
Ensure that 0 is entered in the Digit Restrict Code column.
Station Restrict Code
The third feature assigns Toll Restriction to individual station ports. It includes five different
choices. One of the choices must be entered for each port. Initialised data assigns 00 or no
restrictions to all ports. The choices are explained as follows.
Note
No Station Toll Restriction
Enter 00 in the Station Restrict Code column, next to the port number, to remove Toll
Restrictions from the station.
Class 1 Toll Restriction
Enter 03 in the Station Restrict Code column in the space provided for the port number, if the
selected station will be assigned to the Class 1 level of restriction. Class 1 STD, International
and Local code restrictions are defined in Program 46, and the exception code table is defined
in Program 46-11.
Class 2 Toll Restriction
Enter 04 in the Station Restrict Code column in the space provided for the port number, if the
selected station will be assigned to the Class 2 level of restriction. Class 2 STD, International
and Local code restrictions are defined in
in Program 46-21.
4-26
Program 49 Station Toll Restriction Classification (Night Mode)
To apply Toll Restriction to Tie lines, use station ports 028 ~ 039 for Tie lines 1 ~ 12
respectively. (i.e. For Tie Line 1 you would assign the correct level of toll restriction
to station port 028).
Station restrictions are overridden by lines disabled as defined in
a station port has appearance of a line with restrictions disabled, the restrictions will
be removed from the station on an individual line basis through
Program 46, and the exception code table is defined
Strata DK40 Programming Manual Spring 1999
Program 45-2. If
Program 45-2.