Toshiba Strata DK40 Programming Manual page 53

Program 92 Initialising Misc. Backup RAM
Action (press buttons + LED Buttons)
or...
5 + LED Buttons 01 & 04
Clears System Speed Dial and LCD memos assigned
to system speed dial numbers.
or...
6 + LED Buttons 02 & 03
Clears Character Message Memory (station and
system) and user name display.
or...
7 + LED Buttons 02 & 04
Clears timed reminders.
or...
8 + LED Buttons 01 & 05
Presets the Ring, Speaker, Mute Ring, and Intercom
Tone, BGM, volume levels of all digital telephones to
approximately mid-range.
or...
9 + LED Buttons 02 & 04
Clears all Lock ID Codes that have been set.
or...
;4 + LED Buttons 02 & 05
Creates a reference table of the PCB's installed in slots
for fault diagnostics.
or...
;5 + LED Buttons 03 & 05
Performs a manual test and prints via SMDR
or...
< + LED Buttons 03 & 04
Clears Call Forward and Message Waiting (R3) Memory
except Fixed Call Forward Memory.
+ROG
7.
LEDs lit in Step 5 turn off to secure data in system
programming. Repeat Steps 4~6 until Step is
completed.
6SNU +6SHDNHU,
8.
Prepare system for another selection (go back to Step
5) or exit Program 92 (continue with Step 8).
Strata DK40 Programming Manual Spring 1999
LCD Response
92 Select = 2
Common Dial Clr
92 Select = 3
Msg Clr
92 Select = 4
Tmr Reminder Clr
92 Select = 5
DKT VR Initial
92 select = 6
Backup RAM Clr
92 select = 81
status Chk INIT
92 select = 82
status Check
92 Select = 9
Back Up RAM Clr
92 Select = (1~0)
Data Programmed
92 Select =
Initialisation & Test
2-11