Program *63-1 Dialled Sub-Address Timeout - Toshiba Strata DK40 Programming Manual

System & Station
Program *63-1
Dialled Sub-Address Timeout
Program Type:
Initialised Default:
(QWHU 3URJ 0RGH 0
DATA = Duration of timeout. See legend below:
DATA
00
01
02
03
04
05
Program *63-1 Overview
The DK40 system will accept Sub-Address information dialled from a DKT/EKT/2 wire
extension, where the destination is an internal ISDN2 extension port. This programming
parameter offers a system "Dialled Sub-Address time-out" facility. Once the DKT/EKT/2
wire extension has dialled a valid extension number the "time-out" is started, any further
digits dialled are interpreted as Sub-Address information. When the time-out expires, the
system considers the dialled Sub-Address as complete and will route the call.
Note
3-122
System
04 (4 seconds)
6SNU 9 6 +ROG 0
*
Timeout Value
No Internal Sub-Addressing
01 Seconds
02 Seconds
03 Seconds
04 Seconds
05 Seconds
A very short time-out will require users to enter the Sub-Address information very
quickly. Along time-out will increase internal call setup time.

Program *63-1 Dialled Sub-Address Timeout

6SNU 4 0
DATA
06
07
08
09
10
Strata DK40 Programming Manual Spring 1999
+ROG 0 6SNU & & +ROG
Timeout Value
06 Seconds
07 Seconds
08 Seconds
09 Seconds
10 Seconds
0 6SNU & & +ROG