Toshiba Strata DK40 Programming Manual page 58

Initialisation & Test
Action (press buttons + LED Buttons)
<
View the TPSU Power Cycle Counter. This attribute can
not be edited. The counter indicates the number of times
power is removed from the system after Program 00 was
initialised via Program 90 or 91-9.
+ROG
7.
Secure data in system programming. (Only works for "1"
and "2")
6SNU +6SHDNHU,
8.
Prepare system for another selection (go back to Step 5)
or exit Program 00 (continue with Step 8).
&&+ROG
9.
Secure Program 00 data in system memory.
6SNU +6SHDNHU,
10.
Exit Program 00. Enter another program number
"Program 91-1 Example" on Page
ing mode (go to Step 10). System beeps to indicate it is
exiting Program 00.
&&+ROG
11.
Exit programming mode.
1
N-N is the Program Telephone [DN].
2-16
(see
2-7) or exit programm
Strata DK40 Programming Manual Spring 1999
Program 00 Software Check
LCD Response
00 Select = 9
Counter = XXXXX
00 Select = (0,1,2,3,8, or 9)
Data Programmed
00 Select =
00 Select = ##
Data Programmed
Program =
20 Jan Sun
No. N-N
06:58