Attendant Console Slots Required; Piou/Pious/Rsiu/Rssu Option Slots Required; Pepu Page Option Pcb Required - Toshiba Strata DK14 Installation And Maintenance Manual

DK424 Configuration
Worksheet 1 – System PCB (Slot) Requirements

Attendant Console Slots Required

Enter one slot for each attendant console required (1~4
consoles maximum).

PIOU/PIOUS/RSIU/RSSU Option Slots Required

Enter number of option PCBs required.
Total needed for MIS for ACD (required new)
Total needed for remote/local maintenance with
Total needed for SMDR (existing PIOU)
Total needed for miscellaneous options
Notes
The following subassembly PCBs do not required
additional cabinet slots:
The IMDU subassembly plugs onto
PIOU or PIOUS to provide a remote
maintenance modem.
The RMDS subassembly plugs onto the
RSIU to provide a remote maintenance
modem.
Up to three RSIS subassemblies can
plug onto RSIU to provide any option
listed in this Step.

PEPU Page Option PCB Required

Enter total number of PEPU PCBs needed.
Note PEPU provide 600-ohm interface or 3-watt
page output for external page/BGM
operation.
4-26
DKAdmin/DKBackup PC
Total needed for SMDI
(see Table 4-19)
Total PIOU/PIOUS/RSIU/RSSU PCB slots required
Total RATU PCB slots required
Total PEPU PCB slots required
Strata DK I&M 5/99