Program 10-1 System Assignments, Part 1 Of 5 - Toshiba Strata DK40 Programming Manual

Program 10-1 System Assignments, Part 1 of 5

Program 10-1
System Assignments, Part 1 of 5
Program Type:
Initialised Default:
(QWHU 3URJ 0RGH 0 6SNU
Button/
LED X
Two-Exchange Line
20
Conference/Allowed
19 Conference/Allowed
Ring Detect Time-
18
Normal
Station to Station Call
17
Volume PAD (-8db)
16~12 Not Used
ABR 7 times every
11
120 seconds.
System Speed Dial
10 Override, Toll
Restriction
Exclusive Hold/
09
Allowed
Alternate Point
08
Answer
Ring Transfer of
07 Exchange Line
Allowed
Exchange Line
06
Repeat Ringing
Incoming Call
05
Abandon 8 sec.
Strata DK40 Programming Manual Spring 1999
System
LED's 01, 03, 07, 08. 09,18 and 19 are ON
4 3 +ROG 0 6SNU 4
SELECT = 1
LED ON
Not Allowed
Two-Exchange line Conference must be allowed for Tandem
Line, DISA and CF-EXT, external routing operation. Also
Program
Not Allowed
Ring Detect Time-Short Rings
No Station to Station Call PAD
Not Used
ABR 5 times every 60 seconds.
Restricted
Not Allowed
Transfer Privacy
Not Allowed
If Ring Transfer is allowed, set Ring Transfer Recall time in
Program 37; if ring transfer is not allowed (LED 07 off), the
station will recall immediately if transfer is attempted.
Standard Ring
Standard ring pattern is 1 sec. on, 3 sec. off.
6 sec.
+ROG 0 6SNU & & +ROG
Light the LED Buttons that are marked with an X in the table below.
LED OFF
15, Code 5.
System & Station
0 6SNU & & +ROG
See
3-15