Program 44-1~4 Toll Restriction
Program 44-1~4
Toll Restriction
All Toll Restriction program information is provided later in
Program *44 Overview
This program series defines the incoming digit translation. The system will either delete up
to four of the incoming digits or translate the first two incoming digits.
Program *44-1
Incoming Digit Translation Enable/Disable (Tie
Lines)
Program Type:
Initialised Default:
(QWHU 3URJ 0RGH
0
6SNU
Program *44-1 Overview
If set to 0 will not modify incoming digits, if set to 1 will delete incoming digits and if set to
2 translate the first two digits the system receives.
Strata DK40 Programming Manual Spring 1999
Toll Restriction
Incoming Digit Translation Disabled
7
7
+ROG 6SNU
6SNU
*
4
+ROG
0
6SNU
DATA = 0 to disable Incoming Digit Translation/Deletion
DATA = 1 to enable Incoming Digit Deletion
DATA = 2 to enable Incoming Digit Translation
System & Station
Chapter
4.
&
&
+ROG
0
6SNU
&
&
+ROG
3-103