Program 92 Initialising Misc. Backup Ram - Toshiba Strata DK40 Programming Manual

Program 92 Initialising Misc. Backup RAM

Program 92
Initialising Misc. Backup RAM
Program Type:
Initialised Default:
(QWHU 3URJ 0RGH 0 6SNU
Enter programming mode.
4 34
5 34
6 35
7 35
8 34
9 35
; 4 35
; 5 36
< 36
Strata DK40 Programming Manual Spring 1999
Initialisation - Includes: Initialising Speed Dial Numbers, VM ID
Codes, Character Message Memory, Timed Reminders, Digital
Telephone Volume, Call Forward Backup RAM, and Station Lock
Codes
None
< 5 +ROG 0 6SNU
SELECT = Press
appropriate buttons as
shown below.
36
Clears Station Speed Dial, Voice Mail ID Codes, and LCD memos assigned to Station Speed Dial numbers.
37
Clears System Speed Dial and LCD memos assigned to System Speed Dial numbers.
36
Clears Character Message Memory (Station and System) and User Name/Number Display.
37
Clears Timed Reminders.
38
Resets digital telephone volume levels to initialised settings, specifically, speaker volume levels for Internal Calls
[DN], Tone/BGM, Busy Override (muted ring), and Ring volume to approximately mid-range on all DKTs. Program
92-5 does not affect digital telephone handset receiver volume levels. Use Program 27 to set off-hook digital
telephone handset receiver volume levels.
37
Clears all Lock ID codes that have been set.
38
Creates Reference Table. Every time a new PCB or additional extension
is installed or the slot configuration is adjusted Program 92-81 must run
to update the reference table for fault diagnostics.
38
Manual Test and Print via SMDR.
37 +ROG
Power OFF 5
seconds; then Power
ON
Clear more data
+ROG 0 6SNU & & +ROG
End Program 92.
Clears Call Forward and Message Waiting Memory (all stations). Program 92-9 does
not affect Call Forward External or Fixed Call Forward settings.
Initialisation & Test
0 6SNU & & +ROG
Exit programming mode.
2-9