Replacing The Waste Toner Bottle - Ricoh SP C240SF Operating Instructions Manual

Replacing the Waste Toner Bottle

• Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open
flame.
• Wait at least 30 minutes after disconnecting the power plug before removing the transfer unit.
• Do not incinerate toner (new or used) or toner containers. Doing so risks burns. Toner will ignite
on contact with naked flame.
• Keep the polythene materials (bags, gloves, etc.) supplied with this machine away from babies
and small children at all times. Suffocation can result if polythene materials are brought into
contact with the mouth or nose.
• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a
hot surface).
• Store toner (new or used), toner containers, and components that have been in contact with
toner out of reach of children.
Messages on the screen
• Replace the waste toner bottle when the following message appears on the screen:
"Replace: Waste Toner Bottle"
• Prepare a waste toner bottle when the following message appears on the screen:
"Almost Full Waste Toner Bottle"
• Waste toner bottles cannot be reused.
• For easy replacement, we recommend you purchase and store extra waste toner bottles.
• When removing the waste toner bottle, make sure not to tilt it.
Replacing the Waste Toner Bottle
9
399