Adjust Sp Settings - Ricoh D197 Service Manual

Adjust SP Settings

1. Turn the power ON.
2. Enter the SP values marked on the paper provided, in the following SP.
1. SP4-712-001: CIS GB Adj. Value: R
2. SP4-713-001: CIS GB Adj. Value: G
3. SP4-714-001: CIS GB Adj. Value: B
3. Adjust the registration for the SPDF.

SP6-006-010: ADF Adjustment L-Edge Regist (1-Pass): Front

SP6-006-011: ADF Adjustment L-Edge Regist (1-Pass): Rear

SP6-006-001: ADF Adjustment Side-to-Side Regist: Front

SP6-006-002: ADF Adjustment Side-to-Side Regist: Rear
4. If there is skew, loosen the fixing screw [A] and swivel the SPDF slightly to the left or
right. Then tighten coin screw [A] and make a test copy to check that there is no skew.
SM 2-73 D197/D198/D199/D200/D201/D202
SPDF DF3080