Sending Messages To Other User Interfaces; Clearing Online User - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
l
l
Data Preparations
To manage the user interface, you need the following data:
No.
1
2

5.5.2 Sending Messages to Other User Interfaces

You can configure messaging between user interfaces.
Context
Do as follows on the switch:
Procedure
Step 1 Run:
send { all | ui-type ui-number | ui-number1 }
You can enable message sending between user interfaces.
Step 2 Following the prompt, you can enter the message to be sent. You can press Ctrl_Z or Enter to
end, and press Ctrl_C to abort.
----End

5.5.3 Clearing Online User

You can clear specified online users.
Context
Do as follows on the switch:
Procedure
Step 1 Run:
free user-interface { ui-number | ui-type ui-number1 }
Online users are cleared.
Step 2 On receiving the prompts, you can confirm whether the designated online users have to be
cleared.
----End
Issue 01 (2011-07-15)
Powering on the switch
Connecting the PC with the switch properly
Data
Type and number of the user interface
Contents of the message to be sent
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
64