Table of Contents
Advertisement
11.2
IP protective seal - 3KC9000-8TL68
The IP protective seal 3KC9000-8TL68 provides front-panel IP65 protection for the
ATC6500.
It is mounted between the door cutout and the ATC6500.
Attaching the IP protective seal
11.3
USB front interface - 3KC9000-8TL73
By means of the USB front interface 3KC9000-8TL73, the ATC6500 can be parameterized
from the front interface.
This means that the cabinet door does not need to be opened for parameterization using
software. Communication with the ATC6500 is by means of an infrared connection.
The device can subsequently be parameterized using the Siemens powerconfig software.
The connection is set up via the USB. The USB connecting cable is included in the scope of
supply and measures 1.5 m long.
You can find more information on connecting the front interface in the chapter
Parameterization (Page 155).
Note
powerconfig
In order to parameterize the ATC6500, you require the powerconfig software, version 3.12 or
higher.
3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
11.2 IP protective seal - 3KC9000-8TL68
Accessories
225
Advertisement
Table of Contents
