Analog Gateway; Configuring Keypad Features - AudioCodes Mediant 800B User Manual

User's Manual
27

Analog Gateway

This section describes configuration of analog settings.
Note:
module.
27.1

Configuring Keypad Features

The Keypad Features page enables you to activate and deactivate the following features
directly from the connected telephone's keypad:

Call Forward

Caller ID Restriction

Hotline for automatic dialing

Call Transfer

Call Waiting

Rejection of Anonymous Calls
Notes:
•
The Keypad Features page is available only for FXS interfaces.
•
The method used by the device to collect dialed numbers is identical to the
method used during a regular call (i.e., max digits, interdigit timeout, digit map,
etc.).
•
The activation of each feature remains in effect until it is deactivated (i.e., not
deactivated after a call).
•
For a description of the keypad parameters, see ''Telephone Keypad Sequence
Parameters'' on page 932.
Version 6.8
The Analog Gateway appears only if the device is installed with an FXS or FXO
457 Mediant 800B Gateway and E-SBC
27. Analog Gateway