Configuration Management; Importing/Exporting V-Sipgw16 Configuration Data And Provider Profiles - Panasonic Pure IP-PBX KX-TDE100 Programming Manual

4.1.1 Importing/Exporting V-SIPGW16 Configuration Data and Provider Profiles

4.1 Configuration Management

4.1.1 Importing/Exporting V-SIPGW16 Configuration Data and
Provider Profiles
The configuration data (V-SIPGW16 card—Port Property) or provider profiles (if updated provider profiles are
available) for the V-SIPGW16 card can be exported or imported using the Import/Export tool.
Follow the steps below to import or export the configuration data or provider profiles:
Note
To access the following menu options, you must be logged in to the Maintenance Console in Batch or
Interactive mode at Installer level. For details about the software mode and access level, refer
to "2.1.1 Starting Maintenance Console and Software Modes" and "2.1.2 Access Levels" in the PC
Programming Manual.
[Provider Profiles]
To import provider profiles
1.
From the Tool menu, point to Import, and then click V-SIPGW16 Provider to import.
2.
Navigate to the folder containing the provider profiles you want to open.
3.
Select the file.
4.
Click Open to open the file.
5.
Click OK.
To export provider profiles
1.
From the Tool menu, point to Export, and then click V-SIPGW16 Provider to export.
2.
Navigate to the folder in which you want to save the file.
3.
Enter a file name.
4.
Click Save.
5.
Click OK.
[Configuration Data (V-SIPGW16 card—Port Property)]
To import configuration data
1.
From the Tool menu, point to Import, and then click V-SIPGW16 Settings to import.
2.
Navigate to the folder containing the provider profiles you want to open.
3.
Select the file.
4.
Click Open to open the file.
5.
Click OK.
To export configuration data
1.
From the Tool menu, point to Export, and then click V-SIPGW16 Settings to export.
2.
Navigate to the folder in which you want to save the file.
3.
Enter a file name.
4.
Click Save.
5.
Click OK.
48 Programming Manual for Virtual SIP Trunk Card