Introduction - Thermo Scientific 1267 Series Operating Manual

Introduction

Section 2
Congratulations on your purchase of a Thermo Scientific RO System. This
unit is designed to provide reverse osmosis water for your lab or ultrapure
water system. It uses a thin film composite membrane combined with
three stages of pretreatment to produce reverse osmosis water.
Careful attention to the following instructions will assure that the system
operates properly and produces water to specifications. Also, be sure to fill
out and return the enclosed warranty registration card. We would like to
receive the information requested, and it will help us assure you of proper
warranty coverage.
Each unit requires a separate storage reservoir for automatic operation.
Please make sure you have an adequate storage reservoir before installing
your RO system.
Note Do not use this product for anything other than its intended usage. s
Figure 2-1. Reverse Osmosis System
Thermo Scientific Reverse Osmosis System 2-1