3. Install the system-board tray in the 3U chassis (see "Installing the system-board
4. Install the top cover (see "Installing the 3U chassis top cover" on page 137 ).
5. Install the 3U chassis in the iDataPlex rack (see "Installing a 3U chassis in a
Removing the system-board tray
Note: See "System-board layouts" on page 10 for the locations of the connectors
To remove the system-board tray, complete the following steps.
208
System x iDataPlex dx360 M2: Problem Determination and Service Guide
tray in a 3U chassis" on page 129).
Type 7825 iDataPlex rack" on page 191).
on the system board.