Storage Enclosure Components - IBM System x iDataPlex dx360 M2 Problem Determination And Service Manual

Table 8. CRUs and FRUs, I/O enclosures configured with 3.5-inch simple-swap hard disk drives (continued)
Index Description
5 Two-slot PCIe riser-card assembly (2x4 with 2x16 connectors)
6 2x2 2.5-inch drive filler panel
7 3.5-inch drive filler panel
SATA hard disk drive (see Table 4 on page 110 for the supported
8
drives)
SAS hard disk drive (see Table 4 on page 110 for the supported
8
drives)
9 One-bay hard disk drive bracket and cable assembly, SATA 1x

Storage enclosure components

The following replaceable components are available for the storage enclosure.
Table 9. CRUs and FRUs, storage enclosure
Index Description
1 Storage enclosure
2 Power-supply paddle card domain B
3 Four-bay hard disk drive bracket and cable assembly, SATA 4 to 1x
3 Four-bay hard disk drive bracket and cable assembly, SATA 4 to 4x
3 Four-bay hard disk drive bracket and cable assembly, SAS 4 to 4x
4 3.5-inch simple-swap drive filler panel
118
System x iDataPlex dx360 M2: Problem Determination and Service Guide
2
1
5
CRU part
number
(Tier 1)
44W4801
44W4802
3
4
CRU part
number
(Tier 1)
44W4802
CRU part
FRU part
number
number
(Tier 2)
46D1336
44T0647
CRU part
FRU part
number
number
(Tier 2)
44W4798
39Y7311
44T0672
44T0674
44T0675