IBM System x iDataPlex dx360 M2 Problem Determination And Service Manual page 227

Note: You might have to remove component fillers or covers before you can install
some components.
1. Reinstall the microprocessors and heat sinks (see "Installing a microprocessor
and heat sink" on page 199).
2. Reinstall the DIMMs (see "Installing a memory module" on page 164).
3. Reinstall the battery (see "Installing the battery" on page 138).
4. Reinstall the riser card (see "Installing a PCIe riser-card assembly in the
system-board tray" on page 172).
5. Reinstall the mini-SAS RAID controller and PCIe adapters, if you removed any
(see "Installing an adapter in the system-board tray" on page 154).
Chapter 5. Removing and replacing server components
211