IBM System x iDataPlex dx360 M2 Problem Determination And Service Manual page 99

Table 3. Integrated management module error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 4, "Parts listing," on page 109 to determine which components are customer replaceable
units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Message
Ethernet Duplex setting
modified from %1 to %2 by
user %3. (%1 = CIM_
EthernetPort.FullDuplex;
%2 = CIM_
EthernetPort.FullDuplex; %3
= user ID)
Ethernet Duplex setting
modified from %1 to %2 by
user %3. (%1 =
CIM_EthernetPort.Network
Addresses; %2 =
CIM_EthernetPort.Network
Addresses; %3 = user ID)
Ethernet interface %1 by
user %2. (%1 =
CIM_EthernetPort.Enabled
State; %2 = user ID)
Ethernet locally administered
MAC address modified from
%1 to %2 by user %3. (%1 =
CIM_EthernetPort.Network
Addresses; %2 =
CIM_EthernetPort.Network
Addresses; %3 = user ID)
Ethernet MTU setting
modified from %1 to %2 by
user %3. (%1 =
CIM_EthernetPort.Active
MaximumTransmissionUnit;
%2 =
CIM_EthernetPort.Active
MaximumTransmissionUnit;
%3 = user ID)
Severity Description
Info A user has modified the Ethernet
port duplex setting.
Info A user has modified the Ethernet
port MAC address setting.
Info A user has enabled the Ethernet
interface.
Info A user has modified the locally
administered Ethernet port MAC
address setting.
Info A user has modified the Ethernet
port MTU setting.
Action
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
Chapter 3. Diagnostics
83