Installing A Power Supply In A 3U Chassis - IBM System x iDataPlex dx360 M2 Problem Determination And Service Manual

9. If you are instructed to return the power supply, follow all packaging instructions,

Installing a power supply in a 3U chassis

To install a power supply in a 3U chassis, complete the following steps:
1. Touch the static-protective package that contains the power supply to any
2. Lower the power supply into the 3U chassis.
176
System x iDataPlex dx360 M2: Problem Determination and Service Guide
and use any packaging materials for shipping that are supplied to you.
unpainted metal surface on the outside of the 3U chassis; then, remove the
power supply from the package.