I/O Enclosure Components; I/O Enclosures Configured With 2.5-Inch Hot-Swap Hard Disk Drives - IBM System x iDataPlex dx360 M2 Problem Determination And Service Manual

Table 6. CRUs and FRUs, Type 6386 and 7834 (continued)
Index Description
7 Fan assembly
8 ServeRAID-MR10i adapter
9 Storage-riser-card assembly
3U Label kit
Backplane power Y cable and paddle card
Two-drop power cable
Three-connector Y power cable
Two-connector straight power cable
Hard disk drive signal cable assembly
Bracket kit
3.5–inch hot-swap filler panel

I/O enclosure components

This section lists replaceable components that are available for the I/O enclosure.

I/O enclosures configured with 2.5-inch hot-swap hard disk drives

The following replaceable components are available for I/O enclosures that are
configured with 2.5-inch hot-swap hard disk drives.
Table 7. CRUs and FRUs, I/O enclosures configured with 2.5-inch hot-swap hard disk drives
Index Description
1 Power-supply paddle card domain B
116
System x iDataPlex dx360 M2: Problem Determination and Service Guide
CRU part CRU part
number number
(Tier 1) (Tier 2)
46C6287
43W4297
46D1293
46C6305
44W4553
44W4552
39M5501
39M5503
46C6288
39M4375
CRU part CRU part
number number
(Tier 1) (Tier 2)
39Y7311
FRU part
number
46C6304
FRU part
number