Installing A Storage-Riser-Card Assembly, Serveraid Sas Controller, And Battery Cable Interposer Card In A 3U Chassis - IBM System x iDataPlex dx360 M2 Problem Determination And Service Manual

Hide thumbs Also See for System x iDataPlex dx360 M2:
Table of Contents

Advertisement

10. Remove the storage-riser-card assembly, ServeRAID SAS controller, and
11. If you are instructed to return the storage-riser-card assembly, ServeRAID SAS
Installing a storage-riser-card assembly, ServeRAID SAS controller,
and battery cable interposer card in a 3U chassis
To install a storage-riser-card assembly, ServeRAID SAS controller, and battery
cable interposer card in a 3U chassis, complete the following steps.
1. Touch the static-protective packages that contain the storage-riser-card
9. If you are removing the battery cable interposer card, remove the screw that
secures the battery cable interposer card to the ServeRAID SAS controller and
lift the card from the connector.
battery cable interposer card from the 3U chassis.
controller, and battery cable interposer card, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
assembly, ServeRAID SAS controller, and battery cable interposer card to any
unpainted metal surface on the outside of the chassis; then, remove the
storage-riser-card assembly, ServeRAID SAS controller, and battery cable
interposer card from the packages.
Chapter 5. Removing and replacing server components
183

Advertisement

Table of Contents
loading

Table of Contents