Snmpv3 Group Configuration - Siemens SCALANCE X-300 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.4 The Agent menu
4.4.3.3

SNMPv3 Group Configuration

Security settings and assigning permissions
SNMP version 3 allows permissions to be assigned at protocol level, authentication, and
encryption. The security levels and read/write permissions are assigned according to groups.
The settings automatically apply to every member of a group.
Figure 4-29
Group Name
This lists all previously defined group names. When you click on a group name, a new
window opens in which you can change the parameter settings of a group.
Auth
A cross in this column indicates that the authentication is enabled for the corresponding
group.
Priv
A cross in this column indicates that encryption is enabled for the corresponding group.
Read
A cross in this column indicates that read access is enabled for the corresponding group.
Write
A cross in this column indicates that write access is enabled for the corresponding group.
New Entry
Click on this button to create a new group.
98
SNMPv3 Groups
Configuration Manual, 10/2014, C79000-G8976-C187-22
SCALANCE X-300 / X-400