Appendix D
D.1 Error messages of the SCALANCE X300 / X400
● PNIO configuration invalid, conflict in alternative redundancy configuration.
● PNIO configuration invalid, conflict detected: <description of configuration conflict>
● Standby observer function <started | stopped>
● Standby: Take on the <master | slave> role
● Authentication success, Port: <port number> VLAN: <VLAN-ID> MAC: <MAC address>
● Authentication failed, Port: <port number> VLAN: <VLAN-ID> MAC: <MAC address>
● Authentication for Guest-VLAN, Port: <port number> VLAN: <VLAN-ID> MAC: <MAC
address>
● PoE Port: <port number> power up, Class: <power class>, allocated power: <reserved
power> mW
● PoE Port: <port number> power down
● PoE Port: <port number> enabled
● PoE Port: <port number> disabled due to <reason for turning off>
382
Configuration Manual, 10/2014, C79000-G8976-C187-22
SCALANCE X-300 / X-400