Vlan Learning - Siemens SCALANCE X-300 Configuration Manual

4.5.12.4

VLAN Learning

Learning MAC addresses in VLANs
On this page, you can configure the "Learn to all VLANs" option for each port.
Figure 4-81
Enable learn to all VLANs
If you enable the option for a port, a MAC address received at the port is automatically
learned in all configured VLANs.
Syntax of the Command Line Interface
Table 4- 59 Learn to all VLANs - CLI\SWITCH\VLAN\PORTS>
Command
lrnallv [<E|D> [Ports]]
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
Learn to all VLANs Config Mask
Description
Enables/disables the automatic learning of a MAC address in all configured
VLANs.
4.5 The Switch menu
Comment
Administrator only.
193