Siemens SCALANCE X-300 Configuration Manual page 68

Configuration using Web Based Management and Command Line Interface
4.3 The X-300/X-400 menu
● Standby Status
The "Standby Status" display box shows the status of the standby ports:
– Active:
– Passive:
● Standby Ports
The "Standby Ports" display box shows the standby ports.
"RM Observer Information" section
● Observer Status
The "Observer Status" display box shows the current status of the observer:
– passive
– active
– -
Syntax of the Command Line Interface
Table 4- 15
info
68
The standby ports of this device are active; in other words are enabled for frame
traffic.
The standby ports of this device are inactive; in other words are disabled for frame
traffic.
The observer has not detected any errors.
The observer has detected an errors.
The observer function is disabled.
X414-3E Ring Redundancy - CLI\X-400\RING>
Command
Displays the current ring configuration of the IE
switch.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
-
SCALANCE X-300 / X-400