Dscp To Queue Mapping - Siemens SCALANCE X-300 Configuration Manual

Syntax of the Command Line Interface
Table 4- 69
cos [<0..3> <0..7>]
4.5.15.3

DSCP to Queue Mapping

DSCP Queue
Here, DSCP settings are assigned to various traffic queues.
Figure 4-96 DSCP to Queue Mapping
DSCP
The order of DSCP priorities of the incoming packets.
Queue
The traffic-forwarding queue (send priority) that is assigned the DSCP value.
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
QOS Configuration - CLI\SWITCH\QOS>
Command
Assigns CoS priorities to certain traffic
queues:
•
•
Description
Parameter 1
Queue
Parameter 2
CoS priority
4.5 The Switch menu
Comment
Administrator only.
223