Siemens SCALANCE X-300 Configuration Manual page 313

Figure 4-147 VRRP Virtual Routers
VID
VLAN ID of the subnet. The IP addresses set up for this and all subnet parameters can be
found in the "Router Subnets" menu.
VRID
The ID of the virtual router is displayed in this column. This assigned ID must be unique for
this VLAN. Valid values are 1 through 255.
Primary IP Address
The primary IP address on this VLAN is displayed in this column. The entry 0.0.0.0 means
that the smallest address on this VLAN is used. Otherwise all IP addresses configured on
this VLAN in the "Router Subnets" menu are valid addresses.
Router State
The current state of the virtual router is displayed in this column. Possible values are:
● Master: This router handles the routing functionality for all assigned IP addresses.
● Backup: Currently, a different router handles the routing functionality is in the "Master"
state. The displayed router takes over the redundancy function and is ready to take over
if the master fails.
● Disabled: This router was disabled by the administrator. It no longer handles router
redundancy.
● Initialize: The virtual router has just been turned on. It will soon change to the "Master" or
"Backup" state.
● Invalid: The configuration of this virtual router is invalid. Please check the configuration.
Master IP Address
The IP address of the router currently handling routing functionality is displayed in this
column.
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
4.7 The Router menu (SCALANCE X414-3E)
313