Syntax of the Command Line Interface
Table 4- 72
Command
info
limit [rx | loss] [req |
dem] [<port>] [<limit>]
enable <D|E> [<Port>]
Table 4- 73
Command
info
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
Configuration using Web Based Management and Command Line Interface
Fiber Monitoring Protocol - CLI\SWITCH\FMP>
Description
Shows the FMP configuration.
Specifies the limits for the received power and the
power loss per port:
rx
•
Received power
loss
•
Power loss
req
•
First notification
dem
•
Second notification
port
•
Port for which the settings apply
limit
•
Value for the limit in 1/10 dBm (received power)
or 1/10 dB (power loss)
Enables / disables FMP for the specified port.
Fiber Monitoring - CLI\SWITCH\FM>
Description
Shows general information about the transceivers,
for example model, serial number and current
values, e.g. received and transmit power.
4.5 The Switch menu
Comment
Administrator only
Administrator only
Comment
229