Siemens SCALANCE X-300 Configuration Manual page 268

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
Max. Utilization
Displays the peak value of port utilization as a percentage (%).
Note
With X300, the Utilization value is calculated from the incoming frames. Only correct frames
are relevant.
With X414, the Utilization value is calculated from the incoming and outgoing frames. With
the incoming frames, both correct and bad frames are relevant. With the outgoing frames,
only correct frames are relevant.
Syntax of the Command Line Interface
Table 4- 84
info
size [ports]
type [ports]
error [ports]
clear
268
Statistics Throughput - CLI\SWITCH\STATS>
Command
Shows statistical information on sent and received
frames.
Displays information on the length of the sent and
received frames.
Displays information on the type of the sent and re-
ceived frames.
Displays information on bad sent and received frames.
Resets the counters.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
Administrator only.
Administrator only.
Administrator only.
Administrator only.
Administrator only.
SCALANCE X-300 / X-400