Siemens SCALANCE X-300 Configuration Manual page 374

Appendix B
B.1 MIB variables of a SCALANCE X300/X400
Variables
snX300X400StandbyState
snX300X400StandbyStateChan
ges
snBootStrapVersion
snHwVersion
snSwVersion
snInfoSerialNr
snMacAddressBase
snX300X400ModuleIdentMLFB
snX300X400Power
Supply1State
snX300X400Power
Supply2State
snX300X400ReportDigitalInStat
e
374
Access rights Description
Read only Displays the standby status:
1
•
Device is master and passive.
3
•
Device is slave and passive
5
•
Device is master and active
7
•
Device is slave and active
257
•
Device searching for partner for standby con-
nection
300
•
The standby function is disabled
Data type: Integer
•
Read only Indicates how often the standby status was
switched active.
Data type: Counter
Read only The firmware version of the bootloader in the
major.minor
format
Read only The hardware version of the system in the format
major.minor
Read only The software version of the system.
Read only The serial number of the product.
Read only The base MAC address of the IE switch.
Read only The MLFB number of the module.
Read only The status of power supply input 1.
Read only The status of power supply input 2.
Read only Status belonging to the digital input. (SCALANCE
X414-3E)
Configuration Manual, 10/2014, C79000-G8976-C187-22
.
.
SCALANCE X-300 / X-400