Siemens SCALANCE X-300 Configuration Manual page 40

Configuration using Web Based Management and Command Line Interface
4.1 General information on Web Based Management and Command Line Interface
CLI command syntax Use of pa-
string
Port
Number
MAC
IP
mode
Cross-menu commands
You can use the commands in the following table in any menu or submenu.
Table 4- 1
Com-
mand
/
..
?
exit
restart
About
Help on CLI commands
● You can call up further information with the "?" parameter (if this is necessary and
available for a command).
● If no further information is available, the command syntax from the menu overview is
displayed.
40
rameter
text
Port name
Numeric
value
MAC address MAC address
IP address
Modes of a
function
Command Line Interface - CLI\ ... >
Description
Changes to the highest menu level.
Moves you one menu level higher.
Displays the commands available in the menu.
Closes the CLI session.
Restarts the IE switch
Displays information on the current menu item.
Description
Text is identified as string. (see
example)
Port name
Numeric value
IP address
If there is more than one operating
mode for a function, this is indicated
by the mode parameter.
All available modes can be dis-
played using the "?" parameter
Configuration Manual, 10/2014, C79000-G8976-C187-22
Example
File name
•
Geographic coordi-
•
nates
Names and desig-
•
nations
Passwords
•
5.1 for X-400
or 7 for X-300
1
80:fe:11:f3:4d:d6
192.168.1.1
D
•
disables the func-
tion
Comment
Administrator and User
Administrator and User
Administrator and User
Administrator and User
Administrator only
Administrator and User
SCALANCE X-300 / X-400