Vrrp Statistics - Siemens SCALANCE X-300 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.7 The Router menu (SCALANCE X414-3E)
4.7.16

VRRP Statistics

Introduction
In this menu, you can view the statistics of the VRRP protocol and all configured virtual
routers.
You can reset these statistics to 0 with the "Reset Counters" button.
Figure 4-151 VRRP Statistics
VRID Errors
Shows the number of received VRRP packets containing an unsupported VRID.
Version Errors
Shows the number of received VRRP packets containing an invalid version number.
Checksum Errors
Shows the number of received VRRP packets containing an invalid checksum.
VID
VLAN ID of the subnet. The IP addresses set up for this and all subnet parameters can be
found in the "Router Subnets" menu.
VRID
The ID of the virtual router is displayed in this column. This assigned ID must be unique for
this VLAN. Valid values are 1 through 255.
318
Configuration Manual, 10/2014, C79000-G8976-C187-22
SCALANCE X-300 / X-400