Siemens SCALANCE X-300 Configuration Manual page 266

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
Syntax of the Command Line Interface
NAT - Network Address Translation
Table 4- 82
info
nat [<E|D]
config <VID> <IP> <sub-
net>
BASIC
Table 4- 83
info
add <local IP> <global IP>
delete <local IP> <global
IP>
266
CLI\SWITCH\NAT>
Command
Displays the current NAT settings.
Enables/disables the NAT function.
Specifies the NAT settings VLAN ID, IP address
and subnet mask.
Opens the "Basic NAT" menu item.
CLI\SWITCH\NAT\BASIC>
Command
Displays the current NAT entries.
Creates a new NAT entry.
Deletes an existing NAT entry.
Description
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
Administrator only.
Administrator only.
Administrator only.
Comment
Administrator only.
Administrator only.
SCALANCE X-300 / X-400